Close

Tuner Pin Drill Jig

5.0
  • 37 Reviews
  • Write a review

Tuner Pin Drill Jig

Item # 4857
In stock, ready to ship!

$40.72

+
 
Total:
Qty:
Scroll to Top

Tuner Pin Drill Jig

About This Item

Aligns your hand drill for accurate tuning machine mounting pin holes.

This anodized aluminum jig accurately locates mounting pin holes in the back of a guitar headstock. Use it before drilling for the alignment pins found on many modern enclosed tuning machines. These tuners don't use the traditional exposed tuner mounting screw, but rather a hidden pin on the underside of the tuner housing.

It keeps your hand drill perpendicular for accuracy, and works for left or right-side tuners. You can position single-pin Schaller tuners, two-pin Schallers, one-pin Sperzels, and Fender locking tuners. The jig fits into the peghole with a self-centering bushing and thumbscrew for quick and easy attachment. Instructions included.

This jig is designed for use with a No. 38 (.101") drill bit. Measure the height of the alignment pins on your tuners and drill the holes to the appropriate depth.

This product is made exclusively for Stewart-MacDonald by


Instructions

Product Instructions

Tuner Pin Drill Jig Instructions

How to install tuners with set pins (as opposed to screws) with the Tuner Pin Drill Jig.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.76 average rating from 37 reviews
Sort by
5.0

Great for the job

By
(Customer's Reviews)


Loved it it's great

5.0

great tool to have on hand

By
(Customer's Reviews)


this have been on of the most used tools in the shop recently. I should have purchased this years ago.

5.0

an absolute time saver

By
(Customer's Reviews)


This is by far one of the best jigs at the shop, easy to set up and saves a load of time. I highly recommend this product .

5.0

The jig is up.

By
(Customer's Reviews)


Bought this for a new neck that didn't have the 2 pin holes required for the Fender locking tuners. Works perfect. Got the holes drilled, no sweat, tuners lined up perfect.

5.0

great tool

By
(Customer's Reviews)


makes this tricky little job easy as

5.0

Did the job

By
(Customer's Reviews)


Bought this to drill guide holes for Fender/Shaller tuners in a Warmouth neck and it worked perfectly. The drill size that fits in the jig was not quite big enough for the tuner guide pins, so I had to drill the holes out 1/32 larger.

5.0

A great time saver!

By
(Customer's Reviews)


Have one of these around somewhere, but misplaced it. Needed to get another one for a tuner install job on a current project. I use this mostly to install Schaller single pin locking tuners (occasionally, the two pin version). I use an adjustable square on the flat edge of the Fender headstock to ensure proper alignment. Without this jig...the job would take a whole lot longer, just to align the pin location properly. I highly recommend this jig!

5.0

Nice buy

By
(Customer's Reviews)


I just used this jig to install a set of Spertzel 6-inlines. Unlike a previous reviewer mine was spot on. It made what could have been a complex job a snap. After having used it I cannot imagine not using it. Well worth the $40.00 price tag. Thanks StewMac.

2.0

not a perfect fit

By
(Customer's Reviews)


Surprisingly, this jig was slightly off when using the hole designed for Sperzel 6 in line tuners. We were installing on a 20 year old strat and the hole was too far away from the tuner peg, perhaps 1/4 of the peg diameter. Close but not a perfect fit and it bent the pegs out slightly once we forced them into place.

5.0

Excellent jig and a must have for all the guitar tinkers

By
(Customer's Reviews)


Great piece of equipment and a very trusty friend to my Dremel, where the two in tandem make upgrading tuners a plain breeze. Successfully installed a few sets of Sperzels with these, couldn't be happier.

Cheery-o from London-town

Showing 10 of 37 Read more reviews >>


StewMac PDF Catalog, page 21 See Tuner Pin Drill Jig
on page 21 of our StewMac Catalog PDF

12MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.