Close

Saddle Routing Jig

5.0
  • 22 Reviews
  • Write a review

Saddle Routing Jig

Item # 4043
In stock, ready to ship!

$189.72

+
 
Total:
Qty:
Scroll to Top

Saddle Routing Jig

About This Item

Fast, accurate saddle installations! Slot an acoustic guitar bridge easily and accurately every time. A StewMac exclusive.

We designed this handy jig here in our shops, to solve the tricky router alignment problems you'll encounter when creating or correcting a bridge saddle slot.

It's become a repair shop "must-have," with versatile time-saving uses that will give you easy, accurate results every time.

Slot a new bridge
Slot for a compensated saddle—split saddles too!
Fix an incorrectly located saddle
Flatten the bottom of a slot for an undersaddle pickup
  (crucial for proper pickup response)

The jig works seamlessly with our Precision Router Base and your Dremel. Don't have a Dremel? An adapter for the popular Bosch Colt router is also included (you can drill it to fit other brands of laminate trimmers, too).

Simply clamp the jig at the guitar's soundhole and tailblock. It's made of clear acrylic for easy positioning, with sponge padding to help level the jig on arched soundboards. Thumbscrews allow precise fingertip adjustment of cutter alignment, saddle compensation, slot length and width. Clear acrylic adapter plates are included.

Instructions are supplied with the jig. Clamps, router base and Dremel not included.

TIP: Before using the jig, you'll need to know precisely where to rout. The Saddlematic and the Intonator take away the guesswork.


Video

Trade Secrets!

Trade Secrets!

Finding the right location for a guitar's saddle slot

This issue shows how to locate and cut the saddle slot for an acoustic bridge.

Instructions

Product Instructions

Saddle Routing Jig Instructions

The Saddle Routing Jig lets you slot a new bridge with a traditional single saddle or 2-piece compensated saddle, fill and move an existing saddle slot, widen a saddle slot for a compensated saddle, or flatten the bottom of the slot for a saddle transducer pickup.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.82 average rating from 22 reviews
Sort by
Displaying 2 of 3
1 2 3
5.0

Good Tool

By

Verified Buyer


I just used my new saddle routing jig on an acoustic that came in to the shop with a broken bridge plate and a missing saddle. Set up was easy and quick once I had the rout marked out, and the job was over and done quickly. You do have to be very careful when tilting the router bit into the plate.

4.0

good tool

By

Verified Buyer


The price of this tool makes it worth buying. If you want to make a similar jig it might cost a lot less in materials, but will take a lot of time you could be spending doing other stuff. its easy to use and accurate. i used it with my bosch router. theres a few tricks you need to know while using the tool so if you arent experienced maybe do a test run on a scrap bridge to get a feel for the router and how it cuts in the jig.

5.0

Great professional jig

By

Verified Buyer


This flexible jig has saved me countless hours piecing together jigs on a case-by-case basis, or in developing my own permanent jig.
Quick, accurate and repeatable results.

5.0

Works Great with the Bosch Colt

By

Verified Buyer


This jig works great with the Bosch Colt router. Drill a 1/16" hole at the saddle locations at the e-strings' pin holes. Use your holes for aligning the jig. Then mill your slot in 2 or 3 passes with a 1/16" downcut bit. Make one final pass at full length and depth with the 3/32" for a nice and clean saddle slot.

5.0

Use this great tool with care

By

Verified Buyer


This is a great design, easy to use and does the intended job well. I can't imagine cutting a saddle slot without it. However, one should be careful when the router gets to either end of the cut, as the router seems to take an exceptionally hard bite at the end, and the router bit can move slightly left and right, causing resulting in a slightly wider opening than the slot. This is easily avoided if the operator will hold the router tightly in his (or her) hand as the router reaches the limits of travel.

As always, any tool needs the attention of the operator to work well. This fine tool is no exception.

5.0

Great but could have tighter tolerance

By

Verified Buyer


It is a great tool for bridge work. I found the guide and router base have a few mm of slack. Not bad just have to take care to keep it square on one edge.

5.0

Great product easy to use.

By

Verified Buyer


Had a jig I made myself and it worked fine for years, but once I tried one of these that friend had I was sold. Almost idiot proof, smooth, precise tight fitting action. Easy to clamp down.

5.0

Brilliant!

By

Verified Buyer


An excellent piece of kit. Don't let the high price put you off. It's worth it, for pro results. And it's very easy to use too! Glad I bought one.

5.0

This jig makes precise slotting easy

By


A heavy duty, well-designed jig that makes slotting a bridge easy and precisely accurate. I use plunge cuts and gradually increase the depth of each pass to obtain perfect results. Nice flat slot bottoms for good pickup contact too.

4.0

Jig

By


A great jig for any type of bridge work. Lots of uses for this!

Displaying 2 of 3
1 2 3


StewMac PDF Catalog, page 33 See Saddle Routing Jig
on page 33 of our StewMac Digital Catalog