Close

Guitar Tuner Drill Jigs

4.5
  • 20 Reviews
  • Write a review
Guitar Tuner Drill Jigs 3-in-line with 1/4" dia. pegholes

3-in-line with 1/4" dia. pegholes

Item # 2070
In stock, ready to ship!

$32.54

Guitar Tuner Drill Jigs 3-in-line with 5/16" dia. pegholes
New!

3-in-line with 5/16" dia. pegholes

Item # 2078
In stock, ready to ship!

$32.54

Guitar Tuner Drill Jigs 6-in-line with 1/4" dia. pegholes

6-in-line with 1/4" dia. pegholes

Item # 2071
In stock, ready to ship!

$34.64

Guitar Tuner Drill Jigs 6-in-line with 5/16" dia. pegholes
New!

6-in-line with 5/16" dia. pegholes

Item # 2079
In stock, ready to ship!

$34.64

 
Total:
Qty:
Scroll to Top

Guitar Tuner Drill Jigs

About This Item

Keeps pegholes perfectly aligned and spaced so your tuners will work efficiently.

These jigs align your hand drill correctly, so your tuners will be accurately aligned and spaced. Use them for new instruments, or to correct tuning problems caused by misaligned pegholes.

Each jig is drilled for use with either a 1/4" or 5/16"-diameter bit (sold separately). To enlarge pegholes, or to counterbore for bushings, remove the jig after drilling, and use a Peghead Bushing Reamer.

Made of machined steel for a lifetime of use and specially coated to resist corrosion. Each jig includes two steel transfer pins, two steel alignment pins and instructions.


2070 For 3-in-line tuners
Standard post spacing:  1-3/8" (34.925mm)
Peghole diameter:1/4" (6.35mm)

2078 For 3-in-line tuners
Standard post spacing:  1-3/8" (34.925mm)
Peghole diameter:5/16" (7.94mm)

2071 For 6-in-line tuners
Fender post spacing:  15/16" (23.8125mm)
Peghole diameter:1/4" (6.35mm)

2079 For 6-in-line tuners
Fender post spacing:  15/16" (23.8125mm)
Peghole diameter:5/16" (7.94mm)


Instructions

Product Instructions

Guitar Tuner Drill Jig Instructions

Tuner installation instructions using the Guitar Tuner Drill Jig.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.45 average rating from 20 reviews
Sort by
4.0

Great for Klusons

By

Verified Buyer


I've used this on two necks so far and the spacing is right for Kluson vintage style keys where the spacing and alignment are critical. When used with the peghole bushing reamers it makes for a very easy install. I wouldn't bother with this guide for other types of keys where the alignment isn't as critical down to the thousandth.

2.0

Extremely frustrated.

By

Verified Buyer


Although I have to take most of the blame because of my lack of experience this drilling jig was useless for me. I could've done better by eye. It was clumsy, awkward and frustrating to clamp up. Unless your head stock is a "Usual shape" and square. My head stock shape was that of the Benedetto guitar. Setting up places to drill was hard for me. I was trying to stick to the measurements in the Bob Benedetto video for an Archtop and this just was not the right thing for me to use. I tried to make it work for me by just using it to drill one hole at a time at right angles and not use the 3 hole alignment concept, (because of the different measurements) but that probably was the only way for this thing to hold true and work properly. Again, my inexperience takes most of the blame but I wish there was more information when I bought it.

5.0

Solid & Accurate!

By

Verified Buyer


After several failed attempts to make my own jig I decided to bite the bullet and purchase one of these puppies. The price was a bit of a deterrent but I sucked it up and bought one. With in 15 mins of opening it I had perfectly drilled accurately spaced holes. I will be using this again and again. Well worth the money! Another great Stew-Mac product!!!

3.0

Good but!

By

Verified Buyer


It is a little hard to work with but does save time in the long run

5.0

Great Jig

By

Verified Buyer


This is a fine quality jig that works as expected. Thanks Stew Mac!

5.0

Very nice

By

Verified Buyer


Easy to use , works everytime for perfectly straight holes.

2.0

Tuner Drill Jig

By

Verified Buyer


Worked ok. Would have liked to see centerlines scribed on ends and at each hole for easier, more exact placement of jig on layout lines of peg head. Aligning left and right side to match was tricky.

5.0

Very Handy Tool

By

Verified Buyer


This little tool saves lots of time and reduces the chances of making a mistake.

5.0

Great jig

By

Verified Buyer


If you are looking for clean and flawless tuner holes this is the tool to get. I bought the 6-in-line version and Gotoh Vintage tuners have a perfectly alligned no-gap fit. Make sure to get the .340" Peghead Bushing Reamer and you'll have those wonderful vintage stepped tuner holes.

5.0

great tool

By

Verified Buyer


it does what it says

Showing 10 of 20 Read more reviews >>


StewMac PDF Catalog, page 21See Guitar Tuner Drill Jigs
on page 21 of our StewMac Digital Catalog