TrueChannel Binding Router Jig with Guitar Body Cradle and Binding Bit Set

5.0
  • 26 Reviews
  • Write a review

TrueChannel Binding Router Jig with Guitar Body Cradle and Binding Bit Set

Item # 5994
In stock, ready to ship!

List Price $355.12
Your Price $326.71

+
 
Total:
Qty:
Scroll to Top

TrueChannel Binding Router Jig with Guitar Body Cradle and Binding Bit Set

Cut perfectly squared binding ledges on any instrument—including archtops.

The TrueChannel jig turns your laminate router into a floating cutter. As you move the body of the instrument into the cutter, your router glides vertically to follow the body's top edge. Bindings fit correctly, so you won't have to scrape them too thin.

The problem: The arch of the guitar top, and especially the back, will change the router alignment. Without the TrueChannel, a standard router base will tilt, causing the routed channel to be too deep or too shallow; the bindings won't fit right. TrueChannel keeps the router vertical for a square ledge. Bindings fit correctly.

Includes

  • Rock-steady aluminum router support post with carriage
  • Sliding support brackets (4), adjustable for body shapes and heights
  • Shaped plywood guitar body cradle
  • Binding Router Bit Set with 9 bearing sizes
  • Instructions

SAVE when you buy this TrueChannel set that includes our #1298 Binding Router Bit Set. Designed especially for luthiers, the set features a super-sharp carbide-tipped bit with 1/4" arbor, and custom bearings for cutting the most common binding widths.

The jig carriage fits the popular Bosch Colt Router. An inexpensive Router Mounting Template lets you use other common laminate trimmers, too.

Our thanks to luthier Tom Ribbecke, who inspired this jig.


Trade Secrets!

"Which binding tools should I choose?"

Erick Coleman answers a frequent question from customers: Which tools to use for routing channels for instrument bindings?

Product Instructions

How to Install Bindings

Overview of binding, purfling, and other instrument trim, including binding recommendations and installation techniques.

Product Instructions

TrueChannel Routing Jig

Assembly instructions for our TrueChannel Routing Jig.

Customer Reviews

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
Write a review
5.0
  • 4.77 average rating from 26 reviews
Sort by
5.0

Vibrations, etc.

By
(Customer's Reviews)


Works great now! Tightening knob loosened (despite tightening) with vibrations during use, causing depth of cut to shift. Easily corrected with 11 cent lock washer (not included).

5.0

TrueChannel Jig

By
(Customer's Reviews)


Took some time to set up, but after that the binding channels for my 335 project were cut in a couple of minutes. The result was simply perfect. The support post is rock solid, I bolted it down with two M8 bolts as the original bolts were too short for my needs. I also needed to modify the taller body support blocks to be the same height as the lower ones to get the body leveled in the cradle. Maybe there could be an option for a set of support blocks with the same height?

5.0

Time saver!

By
(Customer's Reviews)


Fast less clean up and clean cuts!

Showing 3 of 26 Read more reviews >>


Shown on page 35 of our latest catalog.