TrueChannel Binding Router Jig with Binding Bit Set

5.0
  • 26 Reviews
  • Write a review

TrueChannel Binding Router Jig with Binding Bit Set

Item # 5992
In stock, ready to ship!

List Price $336.27
Set Savings $309.37

+
 
Total:
Qty:
Scroll to Top

TrueChannel Binding Router Jig with Binding Bit Set

Cut perfectly squared binding ledges on any instrument—including archtops.

The TrueChannel jig turns your laminate router into a floating cutter. As you move the body of the instrument into the cutter, your router glides vertically to follow the body's top edge. Bindings fit correctly, so you won't have to scrape them too thin.

The problem: The arch of the guitar top, and especially the back, will change the router alignment. Without the TrueChannel, a standard router base will tilt, causing the routed channel to be too deep or too shallow; the bindings won't fit right. TrueChannel keeps the router vertical for a square ledge. Bindings fit correctly.

Includes

  • Rock-steady aluminum router support post with carriage
  • Sliding support brackets (4), adjustable for body shapes and heights
  • Binding Router Bit Set with 9 bearing sizes
  • Instructions

Make your own body cradle: This set does not include a plywood Body Cradle, so you can build your own custom shape.

SAVE when you buy this TrueChannel set that includes our #1298 Binding Router Bit Set. Designed especially for luthiers, the set features a super-sharp carbide-tipped bit with 1/4" arbor, and custom bearings for cutting the most common binding widths.

This set does not include a plywood Body Cradle, so you can make your own shape.

The jig carriage fits the popular Bosch Colt Router. An inexpensive Router Mounting Template lets you use other common laminate trimmers, too.

Our thanks to luthier Tom Ribbecke, who inspired this jig.


Trade Secrets!

"Which binding tools should I choose?"

Erick Coleman answers a frequent question from customers: Which tools to use for routing channels for instrument bindings?

Product Instructions

How to Install Bindings

Overview of binding, purfling, and other instrument trim, including binding recommendations and installation techniques.

Product Instructions

TrueChannel Routing Jig

Assembly instructions for our TrueChannel Routing Jig.

Customer Reviews

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
Write a review
5.0
  • 4.77 average rating from 26 reviews
Sort by
Displaying 2 of 3 1 2 3
5.0

True channel routing jig

By
(Customer's Reviews)


I'm doing my first guitar kit, and was very nervous about routing these channels. This jig saved me. I'm using a Ryobi cordless trimmer, which works great with the StewMac cutter & bearings. Just do a few practice runs to get the hang of it!

5.0

Perfect for archtops

By
(Customer's Reviews)


This jig woks perfectly for cutting the binding channels for archtops. I had major problems with cutting these before I got this jig. Now this part of the process is pretty much a piece of cake.

5.0

Better than I anticipated

By
(Customer's Reviews)


I wanted a perfect result and that is what I got. It was simple enough to assemble the Jig and very easy to use succesfully.

5.0

perfect binding job must have

By
(Customer's Reviews)


having struggled with getting perfect clean binding rabbets has been a big frustration on my archtops. This solved my problem nicely. Nothing like good quality tools to improve the building experience.

4.0

TruChannelJig

By
(Customer's Reviews)


Awesome, works very well with masonite as a bottom board. I have only just used it only to trim the overlap with a flush trimmer. Such a pleasure not to have to worry about the arches on the front and back throwing off the tool, no unwanted cutting. Did well with old tool on padouk. It is an excellent tool and a worthwhile investment. Rarely am I this impressed on first use. It would be 5 stars at more reasonable price.

5.0

TrueChannel Jig Product Support

By
(Customer's Reviews)


I had previously purchased the TC Jig and put it into service. Although "working", there was more play between the rollers and post than desirable. I discussed the problem with a Stu-Mac tech. He promptly sent me a new complete post, roller, and router carriage that operates freely without the play. This level of product support is commendable.

4.0

Good idea ...

By
(Customer's Reviews)


... but to make it useable for my German Bosch router I almost had to re-construct the whole sledge, cause the router mounting template does not work at all for that. Now, after heavy modification work, it is a good, useful tool.

5.0

Time-saving ...

By
(Customer's Reviews)


We are very excited about how easy it really is to use this tool. Should not have waited so long with this investment. Can only say that our production time is significantly lower. Can really be recommended! Best regards, Pierre Boserup DubrT
Guitar Services ApS, DubrT-Guitars, Copenhagen, Denmark

4.0

Brilliant Idea - Saved My Butt

By
(Customer's Reviews)


I'm working on a first guitar and was truly terrified of the stage where I'd have to cut the binding and purfling channels. Not that I'd recommend shelling out for this jig just for one guitar - I wouldn't - but as I plan to make this a lifelong pursuit, I'm super happy that I bought this jig. Even for an uninitiated, un-handy noob like me, this jig made the process virtually painless and my binding and purfling channels were perfect. I'd never have been able to do that without this jig. I give it four stars rather than five as, although it is a truly brilliant idea, there is a little room for improvement. For one thing, I'd love to have wheels on the underside of the guitar carriage for smoother movement. Waxing and/or finishing the carriage's underside and plywood workboard is a little cumbersome. Also, I have the Bosch router suggested for this jig and I like it, but I agree the combo is less than ideal - the positioning of the Bosch's power cord in conjunction with this jig really would become a nuisance if working on an electric, mandolin, etc. Setting the depth of cut is actually something of a task as the base will shift slightly when locking/unlocking, so you really have to be careful to do a practice run on scrap and adjust/readjust/readjust. Last, there has got to be an easier way to attach alternate routers - I also own a DeWalt, but having to actually make an alternate base is a seriously cumbersome PITA. In spite of all this, I would absolutely buy it again. It has made my binding life one heck of a lot easier, and will continue to do so.

5.0

Stress  free binding ledges.

By
(Customer's Reviews)


Have just used the TrueChannel Binding Routing Jig for the first time. Great results far less stress the the previous method I was using, and more importantly better more accurate channels.

Displaying 2 of 3
1 2 3


Shown on page 35 of our latest catalog.