New!
Soundhole and Rosette Routing Jig

  • 32 Reviews
  • Write a review

Design update: now works for ukuleles, too!
Cut perfect soundholes and rosette channels for guitars and ukes.

Read more
New!

Soundhole and Rosette Routing Jig

Item # 0686
In stock, ready to ship!

$79.95

+
Currency:
Total: $0.00
Quantity: 20

Details

Design update: now works for ukuleles, too!
Cut perfect soundholes and rosette channels for guitars and ukes.

Easy and accurate, this jig now adjusts from 6"-diameter to a small 2" cut for ukuleles.

Another innovation from StewMac
The Soundhole and Rosette Routing Jig is a quality machined tool, designed to be used with our Precision Router Base and works with your Dremel. Router base and rotary tools are not included.

  • Solid aluminum and brass parts
  • Adjusts from 2" to 6"-diameter cuts (50.8mm to 152.4mm)
  • Indexing scale to quickly set routing diameter
  • 3/16" registration pin for perfectly concentric circles
  • Mounting screws and instructions included

How it works
Attach the jig to the router base, then mount your Dremel or Foredom tool. Insert the registration pin through the center of the uncut soundhole, and into your work surface. Place the jig on the pin. Set the diameter of cut with the adjusting screw, and lock it down. The router base adjusts the cutting depth. Rout your rosette rings first, then cut out the soundhole.

For the cleanest cut when routing tonewoods, we recommend the Carbide Downcut Bits.


Product Instructions

Soundhole and Rosette Routing Jig Instructions

Instructions for cutting a soundhole and routing rosette rings in a guitar or ukulele using the Soundhole and Rosette Routing Jig.

Ratings & Reviews

Soundhole and Rosette Routing Jig

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
  • Based on 32 Reviews
Displaying 3 of 4 1 2 3 4
Write a review

Soundhole/Rosette Routing Jig

By Bill Arnold from Waihi, New Zealand
(Customer's Reviews) Friday, July 08, 2011


Like the router base, a beautifully made tool that, not only looks good but, works really well too.

Does fabulous job

By Al K from Scituate, MA
(Customer's Reviews) Wednesday, July 06, 2011


Very nice. Easy precision adjustment. But it would be nice if they provided an extra dowel pin to make it easy to do setup test cuts on a scrap piece. I bought a couple of extra dowel pins at the hardware store pretty cheap, but they are a bit shorter than the one provided.

Almost Perfect

By geuley from San Jose, CA
(Customer's Reviews) Saturday, June 25, 2011


This tool would be perfect if it included an extra centerpin with a stepped up shoulder that would accommodate the popular 1/4" size pin. Or, even better, if one was available separately.

rosette routing jig and registration pin

By Larry S. from Greenfield WI
(Customer's Reviews) Tuesday, April 26, 2011


Like others have noted, I was reluctant to buy this jig because it came with a 3/16" registration pin, and the rest of my rosette inletting tools used a 1/4" pin. However, I found an easy solution at my local hobby store by using precision brass tubing: one has a 1/4" outside diameter, which fits the 1/4" drill guide that's inletted into my workboard, and the other tube has a 7/32" outside diameter and this slides tightly into the 1/4" tube. The 7/32" tube has an inside diameter of 3/16", which fits the O.D. of the jig's registration pin precisely. The 4 pieces (drill guide, 1/4" tube, 7/32"tube, and the 3/16" registration pin) fit snugly together with no discernible slop. So now I can use my other rosette cutter with its 1/4" pin to do the inside and outside edges of the rosette trough, which completely eliminates any chance of a splintered or fuzzy edge, and hog out the middle using the StewMac jig. Works like a charm.

Versatile attachment

By Josred from VA USA
(Customer's Reviews) Thursday, March 17, 2011


Although designed for radius cutting, I also use it for accurate slotting of back strips, end strips, saddle slots, etc. The fine adjustment makes it particularly accurate for rosette slot cutting when fitting hand made rosettes and decorative strips.

great

By gaetano costanzo from naples, Italy
(Customer's Reviews) Friday, January 28, 2011


what can i say about this tool? wow is the only thing i can think at the moment. It really impressed me positively

Perfect ....!!!!

By georges from athens-Greece
(Customer's Reviews) Friday, November 12, 2010


Another perfect tool for the children of stewmac that make our life easier ..... Thank stewmac .......!!!!!

Astounding routing!

By Mytch Berdah from France
(Customer's Reviews) Sunday, October 17, 2010


I've just used the routing jig to make two rosettes today. A bit shy on the the first one, but the jig's so easy and accurate to use, that the second rosette went twice as fast as the first one! Great StewMac tool!

Makes rosettes easy.

By desmatic from Wales, United Kingdom
(Customer's Reviews) Friday, October 15, 2010


A real joy to use. Highly recommend it. Far better than the stock circle cutter that comes in the dremel tool set.

Precision to make rosettes.

By Borges from Araguari (Brazil)
(Customer's Reviews) Sunday, September 19, 2010


Hi Folks. I make this beautiful custom rosettes in my guitar using this tool. Very accurate, works well with the Dremel. Thanks

Displaying 3 of 4
1 2 3 4


Shown on page 31 of our latest catalog.