Double-edge Fret File

  • 94 Reviews
  • Write a review

Our best-selling fret crowning file!
Precision-cut teeth for accurate fret shaping.

Read more
MIX 2+ SAVE
Buy ANY 2 or more and save $5.25 or more per item.
Enter quantities below, to see your savings. Buy more, save more!
Double-edge Fret File Narrow/Medium

Narrow/Medium

Item # 4490
In stock, ready to ship!

$40.38

MIX 2+ SAVE
+
Double-edge Fret File Medium/Wide

Medium/Wide

Item # 4491
In stock, ready to ship!

$40.38

MIX 2+ SAVE
+
Currency:
Total: $0.00
Quantity: 20

Details

Our best-selling fret crowning file!
Precision-cut teeth for accurate fret shaping.

Each of our popular traditional 7-3/8" x 5/8" tool-steel files has two different 4" hollow-ground cutting edges, for recrowning a variety of fretwire sizes. These files were designed by luthiers for luthiers and are an economical way to get your fretting kit started. The handle is rubber-coated for comfort.


Trade Secrets! Newsletter

How to choose a fret-crowning file

Erick Coleman answers an important tech-support question: What's the best fret-crowning file?

Ratings & Reviews

Double-edge Fret File

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
  • Based on 94 Reviews
Displaying 9 of 10 1 2 3 4 5 6 7 8 9 10
Write a review

Perfect every time !!!

By John Youngman from Fort Worth, Texas
(Customer's Reviews) Sunday, March 13, 2011


As a Refinisher of older Electric guitars, this tool is just the ticket for the refinishing process, It really works as intended, Luv it !!!

Have Surpassed My Expectations

By Bo Thompson from MO
(Customer's Reviews) Tuesday, March 08, 2011


I have used these files now for several months to recrown multiple (100+) Stainless Steele and Gold frets without issue. I had reservations about the durability of these files but have actually found them to be very acceptable. I'm satisfied with the price also.

Gets the job done

By tb from Portland OR
(Customer's Reviews) Thursday, February 24, 2011


I didn't want to spend the cash for the diamond files since I usually only work on my own instruments. These files are well made, and crown frets with little issue. I found that light pressure and many strokes worked well - it also leaves less heavy file marks on the frets. I would go this route again if I had to, but would like to compare these to the diamond files some day.

Double edge fret file

By Mitch from Nerw Berlin
(Customer's Reviews) Sunday, February 20, 2011


I've only used the small side, but it works good, I'm sure the other bigger side works as well. Gives you what you need for forming a good crown.

Looks good!

By Tadas Rudnickas from Denmark
(Customer's Reviews) Wednesday, February 02, 2011


I bought this file to recrown the frets on my Epi Les Paul. Overall, I think it worked good. I just needed to polish some frets after recrowning them to get rid of a few harsh file marks. But i think this was my fault, cause it's the first time i have done it! Thumbs up for stewmac! ;)

Excellent Tool  for Re-Crowing Job

By Pete Davis from Brisbane, Australia
(Customer's Reviews) Monday, January 17, 2011


Recently ordered the Narrow/Med fret file to re-crown a Gibson ES-137.

I bought the guitar secondhand from a store and felt that the previous owner had traded it because the frets were like railroad sleepers (square profile).

I was told like many people, just get use to it and play with a softer feel!

I read about this issue on a number of online forums and decided to order the file from Stew Mac and give it a go. I followed Dan's tips and marked each fret with a felt tip pen and masked the board with Stew Mac thick paper tape before I started. I carefully recut each fret profile where it had been removed at the factory and then finished off with the Stew Mac sanding stick with a couple of grades of belt and then a final polish. Let me say, the tools worked a treat and the instrument has been transformed from a real handful to a pleasure to play.

I followed another tip and put a piece of tape over the top of the file to rest my finger and used it to control the pressure of each strokes. I following the fret radius and watching the width of my felt tip mark slowly reduce as the profile slowly reappeared. Very pleased with the result, thanks Stew Mac.

Great for old divots.

By James M. Powers from USA
(Customer's Reviews) Wednesday, December 22, 2010


We used this tool after the radius sanding block showed us where the highs and lows of the frets were. This file, while is not instantaneous, removed some bad divots and leveled the frets to a good position.


The neck we used was on an old blank that had been used on an old electric Hagstrom (fretted, of course,) and this is a great tool. I also highly recommend the Dan Erlewine Nut Making and Fretting and Advanced Fretting Videos.

Best selling for a reason.

By KL from Christchurch, New Zealand
(Customer's Reviews) Thursday, December 16, 2010


Unless you go to diamond at much greater price, I cannot imagine a more effective file than this for removing fret material to a good profile.

This is the right tool for this job.

By Erick Hanson from Ontario, Canada
(Customer's Reviews) Monday, November 15, 2010


There is only one way to get the frets rounded after you level them off.

Double-edge Fret File Medium/Wide

By mike2036 from Australia
(Customer's Reviews) Tuesday, October 26, 2010


Don't let the price scare you away because this file worth the money you are paying for it. The teeth are spaced very nicely together giving you a smooth cut unlike some other files. I like the handle very much it doesn't slip from my sweaty hands. Handle could be a tad longer but its no big issue

Displaying 9 of 10
1 2 3 4 5 6 7 8 9 10


Shown on page 12 of our latest catalog.