Close

Tuner Pin Drill Jig

5.0
  • 41 Reviews
  • Write a review

Tuner Pin Drill Jig

Item # 4857
In stock, ready to ship!

$40.72

+
 
Total:
Qty:
Scroll to Top

Tuner Pin Drill Jig

About This Item

Aligns your hand drill for accurate tuning machine mounting pin holes.

This anodized aluminum jig accurately locates mounting pin holes in the back of a guitar headstock. Use it before drilling for the alignment pins found on many modern enclosed tuning machines. These tuners don't use the traditional exposed tuner mounting screw, but rather a hidden pin on the underside of the tuner housing.

It keeps your hand drill perpendicular for accuracy, and works for left or right-side tuners. You can position single-pin Schaller tuners, two-pin Schallers, one-pin Sperzels, and Fender locking tuners. The jig fits into the peghole with a self-centering bushing and thumbscrew for quick and easy attachment. Instructions included.

This jig is designed for use with a No. 38 (.101") drill bit. Measure the height of the alignment pins on your tuners and drill the holes to the appropriate depth.

This product is made exclusively for Stewart-MacDonald by


Instructions

Product Instructions

Tuner Pin Drill Jig Instructions

How to install tuners with set pins (as opposed to screws) with the Tuner Pin Drill Jig.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.76 average rating from 41 reviews
Sort by
5.0

Muy bueno

By
(Customer's Reviews)


Entrega rápida

5.0

Accurate time saver

By
(Customer's Reviews)


If you are building your own necks or upgrading tuners, this specialty tool will save time and frustration. Easy to use, especially with the recommended depth stop drill bit.

5.0

Well made, works as advertised.

By
(Customer's Reviews)


This does exactly what it claims to do. I'll have it forever.

4.0

Almost perfect

By
(Customer's Reviews)


Great tool. After I used this it, I figured out how It can be improved. To use this tool you must measure carefully. If you get two, and cut the end of at least one of them, then screw them together with a metal strip, it becomes self aligning. Plus you can drill two at a time, really saves time with six in line. 3D modeling is my thing, so here's a mockup. Hint Hint.

5.0

Great for the job

By
(Customer's Reviews)


Loved it it's great

5.0

great tool to have on hand

By
(Customer's Reviews)


this have been on of the most used tools in the shop recently. I should have purchased this years ago.

5.0

an absolute time saver

By
(Customer's Reviews)


This is by far one of the best jigs at the shop, easy to set up and saves a load of time. I highly recommend this product .

5.0

The jig is up.

By
(Customer's Reviews)


Bought this for a new neck that didn't have the 2 pin holes required for the Fender locking tuners. Works perfect. Got the holes drilled, no sweat, tuners lined up perfect.

5.0

great tool

By
(Customer's Reviews)


makes this tricky little job easy as

5.0

Did the job

By
(Customer's Reviews)


Bought this to drill guide holes for Fender/Shaller tuners in a Warmouth neck and it worked perfectly. The drill size that fits in the jig was not quite big enough for the tuner guide pins, so I had to drill the holes out 1/32 larger.

Showing 10 of 41 Read more reviews >>


StewMac PDF Catalog, page 21 See Tuner Pin Drill Jig
on page 21 of our StewMac Catalog PDF

13MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.