Close

Fret/Fingerboard Levelers

5.0
  • 74 Reviews
  • Write a review
Fret/Fingerboard Levelers 8" length

8" length

Item # 4577
In stock, ready to ship!

$41.88

+
Fret/Fingerboard Levelers 16" length

16" length

Item # 4578
In stock, ready to ship!

$54.44

+
Fret/Fingerboard Levelers 24" length

24" length

Item # 4579
In stock, ready to ship!

$85.45

+
 
Total:
Qty:
Scroll to Top

Fret/Fingerboard Levelers

About This Item

Precision-ground for flatness.
Fast, accurate leveling tools for the pro shop.

Each heavyweight rectangular 1" x 2" steel tube is precision-ground for flatness on the narrow sides. Attach abrasive to quickly level frets or level an unfretted fingerboard. The tool's edges are smooth to prevent gouging.

Available in three lengths, to level any fingerboard.

Roger Sadowsky, ace builder and repairman, wrote us to say:
"I have been leveling fingerboards and frets for 30 years and thought I was pretty set in my ways. However, I have recently tried the 16" steel levelers (#4578) and man, talk about teaching an old dog new tricks! My fingerboards have never been better, and they work much better than files for leveling frets. Thank you again, StewMac!!!"

Cut and stick!
3M Stikit Gold Paper Self-adhesive Abrasives are the right width for our leveling and radius sanding tools. Attach 80 through 220-grits for radiusing and leveling the fingerboard, and 220 through 400-grits for leveling the frets.

Works on stainless frets, too!
All of our tools are suitable for use on stainless-steel fretwire, with the exception of our Fret Tang Nippers. Modern stainless-steel fretwire is known to be harder than the traditional nickel-silver blends, but our own shop experience indicates the wire does not cause premature wear of files or sandpapers.


Video

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.89 average rating from 74 reviews
Sort by
Displaying 4 of 8
1 2 3 4 5 6 7 8
5.0

Heavy and flat

By

Verified Buyer


This is great for hand-sanding a compound radius. There is ample room for a comfortable grip, and the significant heft makes sanding easier compared to a lighter implement. Great tool!

5.0

Take the guess work out of fret leveling

By

Verified Buyer


A must have tool for fret leveling work. Having the right tools makes any job a breaze.

5.0

Totally cool

By

Verified Buyer


I use the fret leveler with 400 grit to start my leveling but switch to a 300 grit file for the fall away.

5.0

Works great!!!

By

Verified Buyer


I bought the 8 and 16 inch beams.. geat for fret leveling a good straight sanding block for a body and level surface for sanding down a nut blank.. Thank you stew mac.

5.0

make life easy

By

Verified Buyer


This and the self-adhesive sandpapers, Item 5772, made leveling fingerboard and frets accurately a breeze.

4.0

nice

By

Verified Buyer


Be sure to clean before putting sandpaper on.16" is more than enough but 8" might have been a bit short for me. I used to use a piece of teak that I had run through the jointer but this is nicer and sturdy enough to clamp with.

5.0

perfect for the job

By

Verified Buyer


I recently bought the 8" leveler to replace my 6" block of aluminum,and it is the perfect width and super flat.I think the 16" is in order for even better accuracy.

5.0

A quick tip for the road

By

Verified Buyer


I've been using these for some time now, and they are simple and works great; good result every time. HOWEVER; after some use, the adhesive from attaching sandpaper will stick to the leveller and make a mess..... You can use some solvents to get the adhesive off the surface, but if you to want to prevent this from happening, you'll want to create a "lower-stick" surface. Grab the nearest candle, gently stroke it on the surface and even it out using a rag or even the palm of your hand. The adhesive will stay on, but it will not make a mess of your tool.

4.0

Must have for fretwork

By

Verified Buyer


I bought the smallest 8" leveler at first, due to the tip in the video, but later i bought the 16" lenght and that is the one i use the most.
Wooden radius blocks should also be used, but you can get a good radius by moving it sideways.

This, and rolls of stikit sandpaper (5772) and you are good for many fretlevelings.

4.0

Good but you also need a radius leveler

By

Verified Buyer


This tool is good for fret leveling but you can't get a perfect uniform radius with it. You should always use a radius leveler too.

Displaying 4 of 8
1 2 3 4 5 6 7 8


StewMac PDF Catalog, page 10 See Fret/Fingerboard Levelers
on page 10 of our StewMac Digital Catalog