Close

Neck Joint Steamer

5.0
  • 24 Reviews
  • Write a review
Neck Joint Steamer Needle, hose and clamp

Needle, hose and clamp

Item # 4059
In stock, ready to ship!

$46.12

+
Neck Joint Steamer Needle and hose adapter

Needle and hose adapter

Item # 4056
Due 1+ month
Email when in stock

$31.16

 
Total:
Qty:
Scroll to Top

Neck Joint Steamer

About This Item

Injecting steam into a dovetail neck joint, through a small hole drilled in a fret slot, helps loosen the glue for neck removal.

Our hose assembly has an extra-long 3-1/2" x 5/64" injector needle, insulating rubber handle, 1/4" hose rated for heat and pressure, and hose clamp for attachment to a pressure cooker or other steam source (such as a espresso/cappuccino maker).

Use with our Neck Removal Jig for faster, cleaner dovetail neck joint disassembly.

This product is made exclusively for Stewart-MacDonald by


Trade Secrets!

Trade Secrets!

The damage caused by storing a guitar in a hot car or attic

Erick Coleman fixes a slipped neck joint on a beautiful Gibson ES-125, showing what can happen to glue joints that get too hot.

Instructions

Product Instructions

Guitar Neck Removal

The Neck Removal Jig applies gradual, controlled pressure for safely steaming the neck out of a dovetail joint.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.79 average rating from 24 reviews
Sort by
3.0

Steamer needle

By

Verified Buyer


I bought it without the hose and adapter.....'cause I couldn't see what the adapter (for the pressure cooker) looked like or dimensions. My various tea kettles and pressure cookers make steam, but I can't tell if the adapter will fit - oh well, I'll make one. But dimensions and close up picture would help - it's an important connection, after all...

5.0

Cappuccino Neck Removal

By

Verified Buyer


What a nice little combo for steaming a neck free! All the right considerations: a good length of heat tolerant tubing; a long needle; and a hand-protecting hose grip. Hooked 'er up to my cappuccino machine and got the job done. I'm happy with this!

5.0

Neck Joint Steamer

By

Verified Buyer


Great piece ! easy to set up and use .

5.0

Neck removal steam needle

By

Verified Buyer


The adapter worked exactly as described , , it's safe & will pay for itself on the first job . StewMac staff is A+ . Best Regards , Mitch ( LOVE CUSTOMS)

5.0

Neck joint steamer

By

Verified Buyer


This is the perfect tool to get the steam down into the dovetail neck cavity. I made one at first but just did not hold up to the steam. I connect mine to a Scunci steamer. Highly recommend this accessory if you intend to remove guitar necks.

5.0

Great tool

By

Verified Buyer


This is a great tool for a really unpleasant task. Separating necks from guitar bodies is something done with trepidation but it's made infinitely easier with this little winner. You definitely need a neck press and patience for this as well. The hardest part is providing the steam. Can't imagine any other way of doing this job really. Good onya Stewmac!

5.0

joint steamer bliss

By


the tool worked perfectly on the four guitars that i've had waiting to be fixed for years.

5.0

Great repair tool

By

Verified Buyer


I removed a set neck in about an hour with this tool. It was a bit of a trick attaching it to a old wallpaper steamer but I now have a repair tool that will be very useful in the future.

5.0

It Works!

By

Verified Buyer


I successfully took a fret board and neck off today. I'm experimenting on an inexpensive 12 string before I make changes to a Martin w/a cracked top (I want to replace top and binding). The key to steaming is understanding how the neck is joined to guitar: otherwise you may not be steaming a joint. Drilling down through fret joint at body and the frets nearest the sound hole and injecting steam, I noticed the guitar filling with water from steamer, and the spruce top under fret board was getting soft. Turns out guitar neck is simply butt jointed to body with 7 wooden pins in different places to make fast, cheap connection. An expensive guitar will use mortise and tenon, and you need to know the measurements of where all those joins are. I changed tactics and drilled 3 holes under fret board where nut was. I slowly pried the fret board off from that direction with very thin spatula type blade. I actually got fret board off in one piece. Then I could see how neck was attached with wooden pins on top, assumed heel of neck was same and was right. It took several hours to melt glue with steam. This requires patience, but it works! And the customer service department has been awesome in helping me with this project. I'm customizing and Epiphone LPJ with Stewmac accessories and having great success. Thanks guys!

5.0

Worth the price

By

Verified Buyer


It seemed pricey, but I was pleased to see how substantial and well made the needle and hose were. The plastic clamp provided was useless but I fixed that problem with a 20 cent adjustable metal hose clamp. There is a knack to steaming off a neck but by the third one I felt comfortable. This is the right tool for the job!

Showing 10 of 24 Read more reviews >>


StewMac PDF Catalog, page 28 See Neck Joint Steamer
on page 28 of our StewMac Digital Catalog