Neck Support Caul

4.5
  • 56 Reviews
  • Write a review

Excellent support for a guitar neck while pressing or hammering frets, or a lower clamping caul for regluing a fingerboard.

Read more

Neck Support Caul

Item # 4479
In stock, ready to ship!

$11.27

+
Currency:
Total: $0.00
Quantity: 20

Details

Excellent support for a guitar neck while pressing or hammering frets, or a lower clamping caul for regluing a fingerboard.

Saw it into shorter lengths to make lower clamping cauls for glue-in fret jobs.

Wooden support with specially contoured and lined it cork to get a firm, non-marring, non-skid hold on the neck.

As supplied with our Fret Arbor Press System.

Dimensions (approximate)
12" x 2-3/4" x 1" (305mm x 70mm x 25mm)


Ratings & Reviews

Neck Support Caul

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
4.5
  • Based on 56 Reviews
Displaying 4 of 6 1 2 3 4 5 6
Write a review
4.0

It's Your Caul

By
(Customer's Reviews)


I use this caul to support fender-style necks (frets down) while I drill and install 4 threaded inserts into the heels. This allows the use of MUCH stronger machine screws to bolt down necks instead of the typical weaker-holding wood screws. I use a soft clamp to keep the neck from moving and it works okay. You do have to place the fingerboard's sides just right in the caul in order to balance each neck, but it does work. I wish the caul was designed better to use in this upside down way, but for low money, who could complain? I'm sure it works perfectly when using as it was intended for doing fret work but if you're you're drilling heels, it's a decent low-cost holder.

5.0

guitar dentist chair.

By
(Customer's Reviews)


this will make your guitar neck relax, while punching some fret wires. :)

5.0

NECK SUPPORT CAUL

By
(Customer's Reviews)


I needed something to use to support the neck of my bass as I attached the fingerboard after working on the truss rod. This caul worked perfectly.

5.0

great neck support 

By
(Customer's Reviews)


excellent for the money!! although i would like to see one with a thicker base so i could use it on my bench a little better... i have mine currently glued to a piece of 1" thick maple to cover the height i needed..still a great tool modified or stock

5.0

Simple but handy

By
(Customer's Reviews)


good support for any standard neck maintenance.
Just add a few layers of danish oil or simmilar to protect the bare wood before putting it to use

4.0

It is good,

By
(Customer's Reviews)


good, however the wood would be appropriated to be fixed

5.0

Safe for your Neck

By
(Customer's Reviews)


I use this always, it's best for your neck

5.0

Suporte para brato

By
(Customer's Reviews)


muito bom, incrivelmente util

4.0

neck support

By
(Customer's Reviews)


Well made tool. The cork inlay is a great idea.

5.0

useful accessory

By
(Customer's Reviews)


practical and necessary when working on the fingerboard

Displaying 4 of 6
1 2 3 4 5 6


Shown on page 9 of our latest catalog.