Fret Arbor Press System

4.0
  • 37 Reviews
  • Write a review

Fret Arbor Press System

Item # 4481
In stock, ready to ship!

List Price $186.03
Your Price $171.15

+
 
Total:
Qty:
Scroll to Top

Fret Arbor Press System

A fretting factory on your workbench! Our veteran fretting experts developed this unique system for speed and accuracy.

You won't find a more thoughtfully designed and efficient arbor-based system! It's far more versatile than generic tool catalog arbors. It can fret an entire unglued fingerboard, a bolt-on neck, and most of an attached neck, quickly and consistently.

Why press frets? Faster and more consistent than hammering (and a lot quieter!), arbor-press fretting is preferred by many guitarmakers. Pressed-in frets have fewer loose ends and more uniform heights, because there's none of the recoil produced by hammer blows.

The complete system includes:

  • Heavy-duty cast steel arbor press
  • Self-leveling pressing caul
  • Five radiused/grooved brass inserts for the caul
  • Table with fence attachment
  • Hardwood neck support
  • Instructions

Designed and refined by StewMac fretting experts. Four interchangeable 2-1/2" grooved brass inserts match standard fretwire radii (7.25", 9.5", 12" and 16"), and a special 6"-radius insert holds down the fret ends when you're using glue. Additional insert radii are available separately. The arbor has an adjustable steel pinion for firm pressure.

Built-in lever return spring. The pressing caul won't fall down and dent your work—makes fretting much easier and less cumbersome. A StewMac exclusive, this is the first half-ton arbor press to feature this innovative spring recoil.

Pinion locking screw. Locks the caul down for clamping a glued-in fret (a handy feature suggested by luthier Bryan Galloup).

Versatile table attachment. The system now includes our 24-3/8" x 3" table attachment with fence, for fretting unglued fingerboards. Adjustment screws move and rotate the table forward and back, to center the fingerboard and precisely align the frets beneath the pressing caul. A thumbscrew locks the table to the arbor.

Faster fretting for production work. The table fence has a retractable indexing pin that works with the notches in our Dual Fret Scale Templates. Attach a slotted unglued fingerboard to a matching template with double-stick tape, and the pin aligns each fret directly beneath the pressing caul. A real time-saver!

Fret glued-on fingerboards, too. Simply remove the table and use the contoured 12" x 2-3/4" x 1" cork-lined hardwood neck support included with the system. (Tip: it's also a handy lower clamping caul for gluing a fingerboard on a neck.)

Already using our Fret Press Caul in your drill press? The Fret Arbor Press with Table is available separately—save money and upgrade your shop.


Product Instructions

Stewart-MacDonald Fret Arbor Press

Setup instructions and useful tips for getting the most out of our Fret Arbor Press System.

Customer Reviews

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
Write a review
4.0
  • 4.00 average rating from 37 reviews
Sort by
3.0

Great tool. but ...

By
(Customer's Reviews)


Its a great tool to use, I don't want to do the job faster, I wanted to do it better, and with the hammer I was not able to do so. The arbor is made in China. Not the prime quality tool that i expected.

5.0

Great features tailor for luthiers. 

By
(Customer's Reviews)


The day I received my press I did two fret jobs. The first one by hammering in he frets which took about 30 mins to get everything seated. And one with the press which seated all the frets the first time and in less than five minutes. (Minus dressing of course). That alone makes it worth it's weight in gold. The amount of time saved is tremendous!!! The press is built just fine I don't understand people's complaints of paint chipping or the packing grease, ect. Sure it takes a few minutes to set it up, but so does every other tool you purchase. The Spring return is a great feature as well as the lock feature for gluing frets. If some of these guys would get back to work instead of writing reviews about how much a tool disappointed them they'd see how useful this fret press is!!!

5.0

Must have tool

By
(Customer's Reviews)


@ 4seasonspickups we use one and we are very happy with it after the 1nd time you use it you've made your money back.

Showing 3 of 37 Read more reviews >>


Shown on page 9 of our latest catalog.