Fret Slotting Miter Box, Miter Box only

  • 34 Reviews
  • Write a review

Improved and smoother than ever! Big improvements in smoothness and efficiency make this exclusive StewMac tool the ideal fret slotting solution for small shops.

Read more
Fret Slotting Miter Box, Miter Box only

Fret Slotting Miter Box, Miter Box only

Item # 2230
In stock, ready to ship!

$165.25

+
Fret Slotting Miter Box, Miter Box and #5755 Japanese Fret Saw

Fret Slotting Miter Box, Miter Box and #5755 Japanese Fret Saw

Item # 2232
In stock, ready to ship!

$206.64 $196.31

+
Fret Slotting Miter Box, Miter Box and #5744 Fret Saw

Fret Slotting Miter Box, Miter Box and #5744 Fret Saw

Item # 2231
In stock, ready to ship!

$194.46 $184.74

+
Currency:
Total: $0.00
Quantity: 20

Details

Improved and smoother than ever! Big improvements in smoothness and efficiency make this exclusive StewMac tool the ideal fret slotting solution for small shops.

Our R&D luthiers have added ball-bearing guides that make sawing impressively easier and a lot faster. No more binding or jamming: cutting fret slots is a pleasure instead of a chore!

SAVE when you order the miter box with our Fret Slotting Saw or Japanese Fret Saw.

"You won't believe how smoothly our improved fret slotting system works!"
—Don MacRostie, StewMac R&D

The ball-bearing guides hold your fret saw perpendicular to the fingerboard, and can be adjusted to match the blade precisely. You can quickly slot any board up to 3" (76.2mm) wide, with adjustable depth of cut for any fretwire. You always have an unobstructed view of your work, too—a feature you'll appreciate. Made of rugged aluminum and 12" (304.8mm) long, our miter box has convenient mounting holes for firm attachment to your workbench.

Note: Since the Miter Box only accommodates fingerboards up to 1/2" thick, it will not work for traditional Fender style one-piece necks, or one-piece cigar box guitar necks.


Saw precise fret scales without measuring. A special indexing pin in the side of the miter box is for use with our Dual Fret Scale Templates. They enable fast, easy and accurate fret slotting for common scales. No guesswork, no tedious measuring—a tremendous time-saver!


Product Instructions

Fret Slotting Miter Box

Using the Fret Slotting Miter Box to accurately cut fret slots with a fretting handsaw.

Ratings & Reviews

Fret Slotting Miter Box, Miter Box only

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
  • Based on 34 Reviews
Displaying 1 of 4 1 2 3 4
Write a review

i freaking love this thing.

By guitarnoob from Seattle, WA
(Customer's Reviews) Monday, September 29, 2014


i don't know how i would fret without this. i'm just a amateur builder and this helped me a lot when i was starting.

A work in progress

By 123 from Maine
(Customer's Reviews) Tuesday, August 05, 2014


This is a decent product and was a huge improvement over slotting frets by hand as I had been doing. However, after using it for 6 or 7 guitars I now have a number of suggestions and critiques.

There is too much wobble with the templates. I am constantly stuffing pieces of paper and feeler gauges between the miter box walls and scale length templates for a snug fit. Accuracy cannot be too high when it wobbles around like that. The box needs to be more appropriately and accurately machined or some type of tighteners must be added that will hug the template snugly in place.

The way that the fret saw rides against the edge of the bearings is odd. I constantly see little brass slivers being shaved off of the fret saw on the bearing edge. It seems like a harsh metal on metal contact even though the bearings are rolling. I'm not sure what the solution to this is, but it seems like a mildly flawed design.

In order to adjust the cutting depth you must loosen a total of 8 allen bolts. Again, not sure what the solution is to this but it eats up a good chunk of time to adjust.

Moc Üikovnß vec

By miroslav hefner from chomutov, czech republic
(Customer's Reviews) Friday, April 11, 2014


S tfmto boxem se pracuje krßsne. MuPu vÜem jen doporucit.

Nice but many marks were missed

By Pacific North Coast Guitars from Washington USA
(Customer's Reviews) Tuesday, April 01, 2014


This is a great box and does a fine job, but it could be so much better. For one, there should be height markers on the saw bearings so that you can easily match both sides to the same height. The threading on the height adjustment screws should be much finer.

"How To" for Cigar Box Guitar or one piece neck

By Michael A. from Modesto, CA
(Customer's Reviews) Monday, February 17, 2014


Aftern whining that this Miter Box wouldn't work on my Cigar Box Guitar builds ... I came up with a work around that is perfect. As the brass top part of the saw is what glides on the mitre guides ... just get yourself a 14" nylon cable ties and glue them right underneath the brass part of the saw. Perfect thickness with a smoothe edge. It's fantastic and works great. Now you have some working area to adjust the depth. Add a couple 1/4" thick x approx 3/4" wide guide pieces ... and your CBG neck will snap right into place in the middle and it works like a dream. StewMac: You can either post this or just eliminate the post I left whining about it. I love it. -M-

hyper pratique

By Fran+ºoisdu16 from Charente,France
(Customer's Reviews) Monday, February 03, 2014


travail soignT,prTvoir la scie a dos qui va avec.

Miter box

By Pete G. from New Haven
(Customer's Reviews) Thursday, November 07, 2013


Don't know what I'd do without this. I've been using it to fret my cigar box guitars and for my acoustic restorations. My frets are perfect using the box.

Exemplo para todos!

By Luthier Felix from S+úo Carlos S+úo Paulo BR
(Customer's Reviews) Thursday, October 24, 2013


Acabei de fazer outra compra simples e bem rßpida neste maravilhoso site que serve de exemplo para o mundo que se chama.

Good but still needs finishing

By Andrew Maz from Austria
(Customer's Reviews) Sunday, August 11, 2013


I have just started using the miter box with the dual fret templates. It basically works ok but there is a fair amount of wobble with the template when cutting as the template is fairly loose in the box. I managed to fix this by grinding down the box base till the wobble was minimized. Maybe stewmac could make the base fit the templates more snugly or make the templates a touch bigger or put some grub screws in the box sides to adjust the fit of the template. No big deal really, just took a while to grind the base accurately. For the price it should work straight out of the box. cheers

accurate? not mine..

By jmczaja from NJ
(Customer's Reviews) Sunday, August 04, 2013


I received a fret slotting mitre box and was extremely pleased with the ease of slotting a blank fingerboard using a scale template. After slotting an entire board, something told me to check it with a square. To my surprise, it's about 1/16" of an inch off. After disassembling the box, it appears that the base is out of square and the screw holes that hold the sidewall in place are about 1/16" of an inch out of line with each other. Hopefully a replacement with better QC will be the ticket. I'm not happy about wasting a fingerboard blank. For the price (not cheap), a customer shouldn't have to worry about quality control..

Displaying 1 of 4
1 2 3 4


Shown on page 15 of our latest catalog.