Your order will ship: TODAY
NEW! StewMac Anchor for Dremel
Loknob Universal Fit Locking Control Knob for Amps and Pedals
Professionally hand-soldered in our Athens, Ohio shop
Shaped like a true '52, available in best quality Southern Swamp Ash and Alder.
50 Guitars and 50 Stories from Inlay Artist Grit Laskin
How to determine string action with the String Action Gauge.
Measure string action (the height of the string above the fret) at any point by
placing the gauge behind the string. The string height markings are at increments
of .010" (ten thousandths of an inch). When the bottom of a mark aligns with
the bottom of the string, that measurement is the string height at that point.
The markings themselves are .005" thick, so referring to the top of a mark
instead of the bottom adds .005" to the measurement. In this way the progressive
string height scale measures in .005" increments.
String action specs
The suggested measurements listed here refer to the string height at the 1st fret
and also at a higher fret. Measured for the outermost bass and treble strings.
Lay a straightedge across the frets and measure the clearance at the 8th. (Or
put a capo at the 1st fret and press a string down at the highest fret —
the string becomes the straightedge.)
Suggested action settings
Our mobile site is new,
DON'T MISS A BEAT, sign up for StewMac news