Close
StewMAX EXCLUSIVE: $30 OFF FRETTING TOOL SET    Learn More »                          
                      SUMMER CLEARANCE    Shop Now »

ColorTone Waterbase Retarder Instructions

Directions for using ColorTone Waterbase Retarder.


I-5575

Additive for brush and spray application of ColorTone Waterbase Guitar Lacquers

1. Add 5-15% by liquid volume of retarder to waterbase lacquer to achieve desired flow and leveling action. Not for use with nitrocellulose lacquer.

2. Mix well during addition of retarder into lacquer. Mix for 1 minute and allow to activate for a minimum of 1 hour before using retarded lacquer.

3. The percentage of retarder may be adjusted to achieve the desired flow, based on the temperature and humidity of your finishing area and method of application. Do not exceed 20% by liquid volume.

KEEP OUT OF THE REACH OF CHILDREN

Emergency First Aid Procedures
Ingestion: Do not induce vomiting. Administer large amounts of milk and seek medical attention. Inhalation: Remove exposed persons to well ventilated area. Consult with a physician if symptoms persist. Skin contact: Promptly wash area with soap and water, and rinse thoroughly. Remove contaminated clothing. Eye contact: Flush eyes with fresh water for at least 15 minutes. Seek immediate medical attention.

KEEP FROM FREEZING
KEEP AWAY FROM FIRE AND HEAT

Contains:

Compound NameCAS#
Dipropylene Glycol Methyl Ether34590-94-8
Performance AdditivesProprietary
Water7732-1 8-5
VOC Content: Under 250 grams/liter