Whether spraying with a production gun or an aerosol can, these basics on how to hold your spray equipment will help you get professional results.
Spray with the gun held about 6-8 inches away from the workpiece and depress the trigger until it lays down a correct swath of finish (a "wet" look for nitrocellulose lacquer, a "half dry" look for waterbase lacquer).
||Hold the gun perpendicular to the surface being sprayed and move it parallel to the surface,
keeping the same distance from the work throughout the spray stroke.
Don't swing it in an arc, which will produce light coverage toward each
side and heavy coverage in the center.
Each pass should overlap the previous one by about a third.
Moving the gun
too slowly will cause the finish to puddle; moving too fast will leave the
surface rough when it dries.
Read Spray Guns: Getting Started for more information on equipment use, care, and troubleshooting.