Close

Grover Ukulele Tuning Machines

5.0
  • 46 Reviews
  • Write a review
Buy more, save more!
Grover Ukulele Tuning Machines Nickel with white knobs, set of 4

Nickel with white knobs, set of 4

Item # 0434
In stock, ready to ship!

$13.68

3 or more $12.18
+
Grover Ukulele Tuning Machines Gold with white knobs, set of 4

Gold with white knobs, set of 4

Item # 0434-G
In stock, ready to ship!

$24.41

3 or more $21.72
+
Grover Ukulele Tuning Machines Nickel with black knobs, set of 4

Nickel with black knobs, set of 4

Item # 0435
In stock, ready to ship!

$13.68

3 or more $12.18
+
Grover Ukulele Tuning Machines Gold with black knobs, set of 4

Gold with black knobs, set of 4

Item # 0435-G
In stock, ready to ship!

$24.41

3 or more $21.72
+
 
Total:
Qty:
Scroll to Top

Grover Ukulele Tuning Machines

About This Item

Guitar-style tuners with shorter string posts especially for ukes, a new modern alternative to traditional friction pegs.

These 2-left/2-right sets have 14:1 gear ratio, stamped baseplates and plastic knobs. Press-fit bushings and screws are included.

Peghole diameter required 11/32" (8.73mm)
Maximum peghead thickness 7/16" (11.11mm)
Screw spacing 15/16" (23.81mm)


Installation Tips

Mounting screws: Pilot holes required. Installing delicate screws into hard wood requires great care and accuracy. We highly recommend the #1711 Depth-stop Drill Bit (No.50 bit) for the pilot hole before installing these screws. Lubricate the screw threads with cutting lubricant (also wax or a bar of soap) to reduce friction and help them thread properly.


    • Item #
    • Weight
    • 0434
    • 0.1706 lbs. (0.08 kg)
    • 0434-G
    • 0.1684 lbs. (0.08 kg)
    • 0435
    • 0.1698 lbs. (0.08 kg)
    • 0435-G
    • 0.1684 lbs. (0.08 kg)

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.78 average rating from 46 reviews
Sort by
Displaying 3 of 5
1 2 3 4 5
2.0

Perf....almost.

By
(Customer's Reviews)


Fine tuners, but the 11.11mm Max headstock thickness is seriously the MAXIMUM. At 11.11mm, the bushings are meeting the taper of the string posts and the headstock looks too thick. 9-10mm is more realistic. Which would be fine but the screws included in the sets I received, the same screws included with other longer tuners, are just a hair over 11mm long. So therefor the minimum usable thickness is also the maxiumum thickness, which is a bit too thick. So you have to choose between a too fat headstock and a pain in the neck screw issue. This is a superfluous headache to slow one down from impending deadlines and dampen productivity.

5.0

Great Tuning Machines for the price

By
(Customer's Reviews)


I use these Grover geared tuners as my standard tuners. Their quality and looks make them a very good buy. I have never had a problem or complaint using them.

5.0

Work well and look good

By
(Customer's Reviews)


These open geared Grover uke tuners look and work well for the price without the weight of the enclosed options out there. Gold with black buttons look great with koa/blackwood.
~ Beau Hannam Guitars ~

5.0

uke tuners

By
(Customer's Reviews)


Great from a functional aspect , well made and a very atractive price . I have yet to find anything better.

5.0

Grover Ukulele Tuning Machines

By
(Customer's Reviews)


Upon receiving my replacement ukulele tuning machines I was immediately impressed with the quality of the item and it only took me 15 minutes to have them installed and operational. An well made ukulele with average friction pegs is now a well made ukulele that can be tuned easily and it stays in tune.

5.0

hold tune really well

By
(Customer's Reviews)


I replaced my friction tuners with this one for my ukulele and now my uke stays in tune really well.

5.0

Great Uke tuners at a gret price

By
(Customer's Reviews)


These Grover Ukulele tuners are just thing if your looking for a balance between economy and quality. I have used them on quite a few ukes and particularly like how lite they are, which for ukuleles is paramount. Best of all, they stay in tune very well and I'd recommend these over friction tuners any day as they are much easier to use and more accurate.

5.0

Good replacement

By
(Customer's Reviews)


I used these 14:1 geared machines to replace some friction pegs. What a difference, the uke stays in tune! What a concept! Install was easy.

My advice: Please ensure that your tools are sharp. Otherwise you may splinter wood and round out screw heads.

5.0

My Uke stays now stays in tune

By
(Customer's Reviews)


I ordered a set for my Cordoba Baretone Uke.
The tunning pegs that were on it never stayed in tune so I up graded to the Grovers.

Now My ukulele stays tuned. Make sure if you have a Baretone Uke that you order the regular size.

5.0

Exactly what I needed!

By
(Customer's Reviews)


This was my first shot at making ukuleles. I made one for each of the kids. I called them the learning curve series. These tuners were perfect, low price, look great and work well. I would recommend them!

Displaying 3 of 5
1 2 3 4 5


StewMac PDF Catalog, page 92 See Grover Ukulele Tuning Machines
on page 92 of our StewMac Catalog PDF

13MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.