Smooth 16:1 gear ratio, with a rear thumbscrew to lock the string. Pin mount on the tuner back keeps it from rotating, no mounting screws needed.
• 16:1 ratio
• 10mm (13/32") diameter pegholes required
• Removable metal knobs
• Set of 6
Staggered string posts:
The Schaller Locking 6-in-line tuners feature staggered string post holes. The tuners with the holes higher above the face of the peghead are used on the E, A, and D strings, and the shorter hole posts are for the G, B, and E strings. This allows the strings to have a steeper angle off the nut than with traditional tuners — eliminating the need for string trees.
Mounting screws: Pilot holes required. Installing delicate screws into hard wood requires great care and accuracy. We highly recommend the #1713 Depth-stop Drill Bit (No.44 bit) for the pilot hole before installing these screws. Lubricate the screw threads with cutting lubricant (also wax or a bar of soap) to reduce friction and help them thread properly.