Vintage appearance plus modern cast baseplates, keystone plastic knobs and 14:1 gear ratio. For 3-left/3-right pegheads.
Threaded hex bushings, washers and screws included. 10mm (13/32")-diameter pegholes required. Set of 6.
Mounting screws: Pilot holes required. Installing delicate screws into hard wood requires great care and accuracy. We highly recommend the #1711 Depth-stop Drill Bit (No.50 bit) for the pilot hole before installing these screws. Lubricate the screw threads with cutting lubricant (also wax or a bar of soap) to reduce friction and help them thread properly.