Economy 3-on-Plate Tuners

  • 28 Reviews
  • Write a review
Buy more, save more!

Economy 3-on-Plate Tuners

Item # 0934
In stock, ready to ship!


3 or more $8.20
10 or more $6.96
Scroll to Top

Economy 3-on-Plate Tuners

About This Item

For solid or slotted peghead steel-string guitars. These inexpensive open-gear tuners will make that yardsale special playable again!

They're versatile: the 1/4" (6.35mm)-diameter string posts have double holes, so you can install these tuners on solid or slotted pegheads. Nickel-plated with white plastic knobs.

1-3/8" (34.93mm) string post spacing, 14:1 gear ratio. Complete set of 3-left, 3-right. Mounting screws included.

Installation Tips

Mounting screws: Pilot holes required. Installing delicate screws into hard wood requires great care and accuracy. We highly recommend the #1711 Depth-stop Drill Bit (No.50 bit) for the pilot hole before installing these screws. Lubricate the screw threads with cutting lubricant (also wax or a bar of soap) to reduce friction and help them thread properly.

    • Item #
    • Weight
    • 0934
    • 0.311 lbs. (0.14 kg)

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
  • 4.75 average rating from 28 reviews
Sort by

Quick and painless!

(Customer's Reviews)

Ordered some tuning pegs to restore my late Mothers 1950's era Stella that I had inherited. This was the first guitar that I learned to play and it was found on the top shelf of a closet under no less than an eighth inch of dust! I ordered the pegs to replace the originals which had some damage and missing pieces and they arrived here in just a few days. They were a perfect fit (detailed dimensions in the catalogue made that very easy) and with a good cleaning, new strings and some TLC it lives again to ring out and sing! Thanks!


Did the Trick!

(Customer's Reviews)

I acquired an old Magnatone mid-50's lap steel in need of repair. These machines fit right in and now it's back in action. The measurement diagram on the item page was very helpful, too.


Save your bushings AND your screws

(Customer's Reviews)

No bushings and the screws are defective. I had 2 break off in the head stock when affixing the plate. There's no easy way to get them out either. This is a big disappointment. What should have been an easy, clean upgrade turned into a hack job.

Showing 3 of 28 Read more reviews >>

StewMac PDF Catalog, page 58 See Economy 3-on-Plate Tuners
on page 58 of our StewMac Catalog PDF

12MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.