NoJak Endpin

  • 14 Reviews
  • Write a review

De-electrifying your acoustic guitar? Replace your strap jack with our unique NoJak endpin and restore the traditional look.

Read more
NoJak Endpin White plastic

White plastic

Item # 4144
In stock, ready to ship!


6 or more $9.80
NoJak Endpin Ebony


Item # 4144-E
In stock, ready to ship!


6 or more $10.00
Quantity Discount Prices apply when you buy multiples of the same item number.
Total: $0.00
Quantity: 20


De-electrifying your acoustic guitar? Replace your strap jack with our unique NoJak endpin and restore the traditional look.

No woodworking, gluing, plugging, redrilling or reaming—the NoJak endpin fits the same 1/2"-diameter hole. The Allen-adjustable expansion sleeve gives a secure fit. And if you ever decide to plug in again, swapping back to your strap jack is no big deal.

Guitarmakers: The NoJak endpin lets you drill the same hole size for all your acoustic and acoustic-electric models, with no additional reaming or tapering.

The NoJak Endpin was designed by the Stewart-MacDonald R&D team.

The pin slides into the 3/4"-long plastic expansion sleeve, and adjusts from inside the guitar with the supplied black metal screw. 5/32" (4mm) Allen wrench required.

Ratings & Reviews

NoJak Endpin

  • Based on 14 Reviews
Displaying 1 of 2 1 2
Write a review

Doesn't fit newer Gibson Hummingbird's 1/2" hole

By \N from \N
(Customer's Reviews) Saturday, November 22, 2014

The 'bird came with the L.R. Baggs simple pickups system. It has the endpin jack and one volume control mounted under the sound hole. The jack hole is exactly 1/2" diameter. The NoJack is too large and will require sanding down the plastic sleeve that comes with it. Not sure what the screw does without a small washer, but I'm going to add one when I get around to doing this install. Anyway, it's the perfect solution for guitars that otherwise normally come with a similar looking end pin. It may require some after-purchase work, but in the end (no pun intended) it'll be worth it.

Does not fit

By Leonard Cianciotto from Dickinson, TX 
(Customer's Reviews) Monday, July 14, 2014

Couldn't install it. Advertised as fitting a standard 1/2" hole, but it is oversize, requiring either widening the hole or sanding the plastic sleeve. Widening the hole is NOT an option, since it would be too wide if I ever wanted to reinstall a pickup. Sanding the plastic would just make me angry, since it's advertised that no fitting is required. So guess I'm stuck.

It does work....

By Shop Manager from Indianapolis, IN
(Customer's Reviews) Tuesday, June 11, 2013

The NoJak does work but requires quite a bit of modification to fit into end pin holes made by a standard 1/4" acoustic input jack. A ton of sanding is required to make the plastic cowl fit with the pin inserted at the proper depth. For the customer that wants the flexibility of replacing with a jack at any time, this is certainly ideal. For the customer that simply doesn't want an installed pickup/jack, I would rather fill and re-drill for a standard strap button.

Just what I needed

By Normhart from Guam
(Customer's Reviews) Wednesday, March 06, 2013

I decided to remove my UST pickup after a good number of years (I never liked the idea of having a clunky 9v battery in there). Since I don't play out often enough, I decided to invest in a good mic to do the recordings with. Minor point, I wish there was one available with the black dot like my original but the quality is great anyway. Big plus is the flexibility to go back if I ever wanted to.

Did the job admirably

By mountainpicker from Crested Butte, CO
(Customer's Reviews) Thursday, February 07, 2013

I tore all the electronics out of my 1997 Gibson Early J-45 to make it lighter and to let the saddle sit lower in its slot as it was kinda high and to, hopefully, improve the tone. So, I had this gaping hole where the jack was and this was the least expensive filler. I had absolutely no installation problem like some mention here and the ebony looks original for all intents and purposes. Couldn't be happier.

Difficult to use

By Adams Guitars from Wisconsin
(Customer's Reviews) Sunday, January 06, 2013

I found this rather difficult to install. I like what it is trying to do, but a better design is needed.

You need a few different sizes

By Dr. Jazz from Calgary, AB
(Customer's Reviews) Friday, December 07, 2012

I ordered several of these as I order many of my instruments drilled for the Fishman type Jack. I discovered that it takes about 10-15 minutes of careful work on a belt sander to sand enough material to allow the unit to fit properly. It is a great concept, but not enough thought went into the research.

Lefty S

By Lefty S from Austin, TX
(Customer's Reviews) Monday, June 11, 2012

I attempted to fill the end pin hole left from a Fishman Matrix in a D28. The insert was much too large and since I did not want to ream out the hole any larger, I used a large washer on the inside of the end block to hold the pin in place.

Nice, Easy Fix

By bbrich57 from Austin, TX
(Customer's Reviews) Wednesday, May 16, 2012

It was no harder to install this than it was to remove the buttonless jack someone installed in my Sigma DR-9. It is a bit tight, but a long allen wrench did the job... no problem. I only wish these were offered in black dot, but oh well. No big deal. Thank you Stew-Mac for coming up with a GREAT solution to this otherwise time-consuming fix.

EZ Fix

By Jim Du Beau from River Falls , WI
(Customer's Reviews) Tuesday, April 03, 2012

Gives a nice tight clean fit. So simple anyone can install it.

Displaying 1 of 2
1 2

Shown on page 44 of our latest catalog.