Close

Grover 18:1 Sta-Tite (97-18 Series) 3+3 Tuners

5.0
  • 66 Reviews
  • Write a review
Buy more, save more!
Grover 18:1 Sta-Tite (97-18 Series) 3+3 Tuners Nickel

Nickel

Item # 4592
In stock, ready to ship!

$47.70

3 or more $42.45
+
Grover 18:1 Sta-Tite (97-18 Series) 3+3 Tuners Gold

Gold

Item # 4592-G
In stock, ready to ship!

$77.70

3 or more $69.15
+
 
Total:
Qty:
Scroll to Top

Grover 18:1 Sta-Tite (97-18 Series) 3+3 Tuners

About This Item

Grover Sta-Tite™ tuners are a modern version of a vintage design. For 3-left/3-right solid pegheads.

Each tuner features 18:1 gear ratio for fine tuning, a cast baseplate, vintage style scalloped knobs, and nylon worm bearings and tension screw for smooth operation.

Sets of 6 (3-left/3-right). Each set includes mounting screws and knurled press-fit peghead bushings. 11/32" (8.73mm) diameter pegholes required.

Also available for slotted pegheads.


Installation Tips

Bushings: We recommend the #2062 Bushing Reamer (.340" diameter) to cut a clean, accurate counterbore for a professional job. Fit the press-fit tuner bushings correctly so your tuners will work smoothly.

Mounting screws: Pilot holes required. Installing delicate screws into hard wood requires great care and accuracy. We highly recommend the #1711 Depth-stop Drill Bit (No.50 bit) for the pilot hole before installing these screws. Lubricate the screw threads with cutting lubricant (also wax or a bar of soap) to reduce friction and help them thread properly.


    • Item #
    • Weight
    • 4592
    • 0.3520 lbs. (0.16 kg)
    • 4592-G
    • 0.3520 lbs. (0.16 kg)

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.77 average rating from 66 reviews
Sort by
5.0

great tuners

By

Verified Buyer


put the on a Gretsch Pro Jet!

5.0

Grover tuners are precise

By

Verified Buyer


Putt these on my Gretsch and they are perfect!

5.0

Perfect install

By

Verified Buyer


I am a musician but not an experienced luthier. The dimensions listed on the StewMac website really helped me to choose the correct replacement size on my tuners for a very old Yamaha acoustic. The installation video helped tremendously in removing the old bushings. Thank you StewMac!

5.0

nice tuners

By

Verified Buyer


Grover tuners have been my first choice for guitar tuners for years. Excellent quality at a reasonable price. I have used Sta-Tite for all my ukuleles and some acoustic builds and have had great results on all of them.

5.0

Great Tuners and Great Price

By

Verified Buyer


The factory installed Sta-Tite tuners on my DR500-MCE had too much play and I was constantly retuning, so I took a chance and replaced the original's with a new set. The new Sta-Tites are great and my guitar sounds better than ever.

5.0

Grover Tuners

By

Verified Buyer


The Grover tuners worked out great on my Eastman. I had to make some very minor changes for hole sizes. The shaft through the headstock needed to be slightly enlarged. Additionally, the screw holes holding the backplate to the headstock were off by about by approximately 1 mm.
For someone who had no experience, I think the job went extremely well. The new tuners really work great too.

5.0

much needed

By

Verified Buyer


I have 2 Blueridge acoustic guitars and they come with a fair set of open back tuners but some times they would feel a little sloppy with a 14:1 gear ratio. I have used these Grover 18:1 Sta-Tites in the past and they are some of the best tuners that I have used. I have tried higher priced tuners but these are the best. Thanks Grover for making a great product. Bill K.

5.0

Perfect Replacement for Hofner Ignition Series Club Bass Tuners

By

Verified Buyer


I just received my Grover tuners today and the bushing reamer (#2062 .340" diameter). I replaced the stock tuners (the A stringer tuner failed on the stock ones immediately on first tuning). With the recommended bushing reamer on my electric drill, I enlarged the holes on the bass headstock and the new bushings fit right in. The rest of the installation was a snap. I put on new LaBella flat wounds and I was in business. The Grovers are the ideal replacement for this bass! Thanks Stewmac!

5.0

Superb!

By

Verified Buyer


Replaced the old worn out tuners on my 1960 000-18 Martin. These were perfect!

5.0

tuners, machine heads

By

Verified Buyer


these are of good quality, and Stew Macs service is great

Showing 10 of 66 Read more reviews >>


StewMac PDF Catalog, page 63 See Grover 18:1 Sta-Tite (97-18 Series) 3+3 Tuners
on page 63 of our StewMac Digital Catalog