Close

Neck Mounting Ferrules

4.5
  • 15 Reviews
  • Write a review
Buy more, save more!
Neck Mounting Ferrules Chrome, package of 12

Chrome, package of 12

Item # 4184
In stock, ready to ship!

$7.50

3 or more $5.92
+
Neck Mounting Ferrules Black, package of 12

Black, package of 12

Item # 4184-B
In stock, ready to ship!

$10.89

3 or more $8.60
+
Neck Mounting Ferrules Gold, package of 12

Gold, package of 12

Item # 4184-G
In stock, ready to ship!

$11.50

3 or more $9.08
+
 
Total:
Qty:
Scroll to Top

Neck Mounting Ferrules

About This Item

For bolting a neck onto a contoured solidbody when a flat neck attachment plate is impractical.

5/8"-diameter counterbored holes required. Supplied in packages of 12.

Mounting screws sold separately.

We recommend using a Fisch Forstner Bit, or brad-point drill bit to recess these neck bolt ferrules to 3/16" standard depth (this may vary according to instrument design). If you're drilling the holes before applying finish, use a 5/8" diameter bit—it'll make a slightly oversized hole to allow for finish thickness in the recess. Use a 15mm bit if you plan to fit the ferrule with no finish in the recess.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.67 average rating from 15 reviews
Sort by
4.0

Not 5/8"

By
(Customer's Reviews)


These have a 15mm diameter (14.9 actually). They are very loose in a 5/8" hole. You need a 15mm Forstner bit if you're going to use these.

4.0

For Bo Diddley Twang machine

By
(Customer's Reviews)


Perfect look for bolt in neck

5.0

great no neck plate

By
(Customer's Reviews)


Works great

5.0

Goodbye neck plates

By
(Customer's Reviews)


For any builders that use any kind of bolt neck joint thats not a square, these are perfect. I like them better than plates personally cause you aren't held to the screw placement of a traditional plate. And if you want 5 or 6 screw in the neck then go right ahead. Just use a good forstner bit for cutting the hole. A drop of glue and press them in. Ready to go.

5.0

For that professional touch.

By
(Customer's Reviews)


These ferrules are sized perfectly and look great.

5.0

Tight fit problem

By
(Customer's Reviews)


If you use too much lacquer, the ferrules are too tight. Heat with a soldering iron, and press in with a wood dowel. Just be careful not to overheat. They will fit perfectly. If you need to remove them, I chuck up a 1/4" screw remover and spin the ferrules right out without any chipping.

5.0

Excellent little thing

By
(Customer's Reviews)


Sleek design and great quality material. Great job. Thank you.

5.0

work like a charm

By
(Customer's Reviews)


I was trying to set the neck on the 'bird as far out as possible, and these ferrules bought me about 3/4" over a standard neck plate, and also installed neat and flush. Definitely use a Forstner bit.

5.0

Works well

By
(Customer's Reviews)


I used a 15 mm Brad drill and in they go. nice snug fit and look great as well. As you get 12 in the pack I will continue to use these ferrules.

5.0

GOSTEI

By
(Customer's Reviews)


EU ESTAVA PRECISANDO DESTAS BUCHAS PARA FIXA¦+O DO BRA¦O.

Showing 10 of 15 Read more reviews >>


StewMac PDF Catalog, page 73 See Neck Mounting Ferrules
on page 73 of our StewMac Catalog PDF

12MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.