Close

Control Cavity Cover Plate

4.0
  • 10 Reviews
  • Write a review
Buy more, save more!

Control Cavity Cover Plate

Item # 0081
In stock, ready to ship!

$11.28

3 or more $10.04
 
Total:
Qty:
Scroll to Top

Control Cavity Cover Plate

About This Item

Designed to fit many modern guitars. Squared edges for flush mounting, and four countersunk holes for mounting. Glossy black.

1/2" Fender-style mounting screws sold separately. Use control cavity routing templates to get a perfect fit for this cover plate.

Dimensions:
3-1/2" x 7-3/4" x 1/8"
(88.90mm x 196.85mm x 3.18mm)


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.0
  • 4.10 average rating from 10 reviews
Sort by
5.0

Perfect fit for the corresponding Template

By

Verified Buyer


This cover is a perfect fit for the control cavity routing template offered by StewMac. If the cavity is routed correctly, the cover will sit flush with the back of the instrument.

5.0

Original Quality

By

Verified Buyer


COver fits and looks like the original.

5.0

Cover plate

By

Verified Buyer


The plate is a perfect fit for there template, looks awesome

5.0

Control Cavity Cover

By

Verified Buyer


It covers the control cavity. 10/10

4.0

Good fit

By

Verified Buyer


Use it after you rout using the stewmac routing templates and it fits perfect. They come still covered in plastic and protective paper so they stay new looking until you're ready to install. My only complaint is that the price seems a bit high for an oval, square edged piece of plastic.

3.0

Covers the Hole

By

Verified Buyer


It's a shaped piece of plastic, not much more to it than that! If you need it, then it's great that you can buy it here (like so much other useful stuff). If you are using the matching template, do a few test runs on scrap first as I found I needed a few wraps of tape around the router bearing to get a better fit. Allow for the thickness of the finish. (wise men learn from the mistakes of others...please share your mistakes :-)

3.0

Fills a gap

By

Verified Buyer


I bought the cover plate really to act as a template for making wooden covers to match the control cavity templates. It seems substantial but the edges need quite a bit of finishing which sort of defeats the purpose. This and the related templates are products that probably could do with review by StewMac.

1.0

way off of StewMac's cavity template

By

Verified Buyer


The cover's fit is way too sloppy in the cavity routed with the cavity template set. The whole point of buying the cover and the cavity templates is so that they match perfectly. The cover is undersized over a sixteenth of an inch in some spots, and even worse, it's not consistently undersized around the whole shape. So you can't even use a not-quite-flush bit with the cavity template in order to match the cover. Basically, I had to route a copy of this cover with a 1/16 larger bearing, and then sand extensively to make it fit the cavity.

5.0

Nice.....:) 

By

Verified Buyer


Used with SM's templates this cover fit like socks on a rooster. I wish SM offered this cover in exotic woods. :)

5.0

First quality

By

Verified Buyer


Great look, and the perfect thickness to make you feel it is strong.



StewMac PDF Catalog, page 38See Control Cavity Cover Plate
on page 38 of our StewMac Digital Catalog