Close

Plastic Mounting Rings For Humbucking Pickups

4.0
  • 46 Reviews
  • Write a review
Buy more, save more!
Plastic Mounting Rings For Humbucking Pickups Low, cream

Low, cream

Item # 1509
In stock, ready to ship!

$4.19

4 or more $3.65
+
Plastic Mounting Rings For Humbucking Pickups Low, black

Low, black

Item # 1507
Due 5-7 days
Email when in stock

$4.19

4 or more $3.65
+
Plastic Mounting Rings For Humbucking Pickups Tall, cream

Tall, cream

Item # 1510
In stock, ready to ship!

$4.19

4 or more $3.65
+
Plastic Mounting Rings For Humbucking Pickups Tall, black

Tall, black

Item # 1508
Due 5-7 days
Email when in stock

$4.19

4 or more $3.65
+
 
Total:
Qty:
Scroll to Top

Plastic Mounting Rings For Humbucking Pickups

About This Item

Traditional plastic mounting rings for Gibson® humbuckers. Purchase pickup height and mounting ring screws separately.

Outside dimension 3-17/32" x 1-25/32" (89.69mm x 45.24mm)
Inside dimension 2-3/4" x 1-1/2" (69.85mm x 38.10mm)
Low taper 3/16" to 1/4" (4.76mm to 6.35mm)

For use at the neck position on instruments with a Gibson® bridge, and can be used at the neck and bridge positions with a Fender bridge.
Tall taper 3/8" to 7/16" (9.53mm to 11.11mm)

For use at the bridge position on instruments with a Gibson® bridge, and are too tall for Fender bridges.

Each mounting ring has a flat (non-arched) bottom, and must be trimmed or sanded to match an arched guitar top.

Color-matching Cream Parts and Bindings
There have always been slight variations in the color of the cream plastic parts used on Gibson and other guitars. It's not uncommon to see brand new and vintage guitars with bindings, pickup rings, toggle switch rings and pickguards that don't perfectly match in color. We do our best to match all our cream products, but there's no absolute control from batch to batch, or from supplier to supplier.


Video

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.0
  • 3.83 average rating from 46 reviews
Sort by
Displaying 2 of 5
1 2 3 4 5
2.0

Orangy

By

Verified Buyer


The cream rings are a bit on the orange side, as are the cream p-90 covers. More orangy than normal and nowhere near an ivory color. Quality is fine, color is odd.

3.0

Not bad...

By

Verified Buyer


I ordered two of these and a pickguard for a Les Paul. They look OK to me but unfortunately they don't match the pickguard's color. The rings I got are a bit darker then they appear in the photo.

5.0

Work Very Well

By

Verified Buyer


I found these mounting rings more precise than many others. They work very well.

2.0

TOO SMALL

By

Verified Buyer


purchased these to replace the ones on my Mosrite Celebrity. the size of these would not cover the opening in the body! put them away in my stash of parts, maybe able to use them on another project.

3.0

Not Quite Right...

By

Verified Buyer


Not a height, cast-in arch, or perfect color match to my 2011 Gibson Les Paul 50s Tribure Studio. Probably fine for SG style.

3.0

Not bad but overpriced!!

By

Verified Buyer


Does the job but way overpriced for such a flimsy piece of plastic!!

1.0

Bad color match.

By

Verified Buyer


Cream Color is too far off from the pick guards color and doesn't line up very well to old pattern. I don't like them. you get what you paid for here I'm afraid.

1.0

cream is not cream more like beige/coffee

By

Verified Buyer


my stock creak pickup covers had some blemishes, and my switch washer was faded so I ordered new rings, washer and jack cover, all in cream. my knobs are cream colored too, and the pickups are zebra with cream and black... all colors of cream match, even matching the cream on the switchcraft switch, these rings are being returned however because the cream is noticeably darker than everything else... they look worse than the blemished ones I took off. black is black... but a cream color should match the other cream parts pretty closely.

3.0

Confused

By

Verified Buyer


I'm a bit confused as to why one end of the mounting ring is higher than the other and it slopes gradually down. I'm not certain as to what side goes where when mounting. Also, it barely just fits over the humbucker routing pocket I did using the humbucker routing template. I would prefer it to be a tad bit wider on the sides to insure complete coverage with no chance of peeking thru to the pocket below. Other than those 2 things, it works fine.

5.0

Does The Job!

By

Verified Buyer


Not much to a plastic humbucker ring. Sturdy plastic.

Displaying 2 of 5
1 2 3 4 5


StewMac PDF Catalog, page 49 See Plastic Mounting Rings For Humbucking Pickups
on page 49 of our StewMac Catalog PDF

11.5MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.