A combination zinc die-cast bridge and "stop" tailpiece for solidbody guitar that can be adjusted for better intonation.
M8 x 1.25mm
Two allen screws compensate the overall string length, and two allen-adjustable saddles provide basic string intonation. Strings load from the front. Nickel.
Height-adjustable M8 x 1.25 steel mounting studs with locking allen screws and knurled bushings are included. Use an 11mm drill bit to install the bushings.
About bridge & tailpiece measurements
String spread is the distance between the centers of the outer strings on a bridge or tailpiece.
Saddle radius determines the arc formed by all the individual saddle heights, and is similar to the measurement of a fretboard.
Stud/post spacing is the distance between the centers of the mounting posts of a bridge or 'stop' tailpiece.
Positioning the bridge
Find bridge placement for any scale with our free online tool fret position calculator.