Close

Schaller Non-Tremolo Roller Bridge

5.0
  • 32 Reviews
  • Write a review
Buy more, save more!
Schaller Non-Tremolo Roller Bridge Chrome

Chrome

Item # 0577
In stock, ready to ship!

$66.95

3 or more $60.92
+
Schaller Non-Tremolo Roller Bridge Black

Black

Item # 0577-B
Due 1+ month
Email when in stock

$78.11

3 or more $71.08
Schaller Non-Tremolo Roller Bridge Gold

Gold

Item # 0577-G
In stock, ready to ship!

$89.27

3 or more $81.24
+
 
Total:
Qty:
Scroll to Top

Schaller Non-Tremolo Roller Bridge

About This Item

A highly adjustable non-trem Strat inspired bridge that doesn't require through body stringing or string grommets.

Low-friction roller saddles adjust for intonation and height, and for string spacings from 2" to 2-3/16" (50.80mm to 55.56mm). A cam screw locks the saddles to the grooved baseplate. The strings mount at the rear of the bridge. Screws included.

The saddles and the 2-13/16" x 1-15/16" (71.44mm x 49.21mm) baseplate are brass. A removable 1/8" (3.00mm) spacer is included for raising the baseplate height if needed. Use a .050" allen wrench to adjust the saddle heights from 3/8" to 17/32" (9.53mm to 13.49mm) from the guitar body (E string positions).

Positioning the bridge
Find bridge placement for any scale with our free online tool fret position calculator.


    • Item #
    • Weight
    • 0577
    • 0.4340 lbs. (0.2 kg)
    • 0577-B
    • 0.4340 lbs. (0.2 kg)
    • 0577-G
    • 0.4340 lbs. (0.2 kg)

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.88 average rating from 32 reviews
Sort by
Displaying 2 of 4
1 2 3 4
5.0

Saved my axe

By
(Customer's Reviews)


I had bought a loaded hardtail strat body and when I installed a neck on the guitar and strung it, I found that the strings did not line up with the bridge and pick guard and pickups. Careful examination showed that the neck was fine, but the bridge and holes for the string-thru body had been improperly placed, were sitting on a slight angle, and didn't even line up with the pick guard. So I bought this Schaller bridge since it looked like it had a lot of adjustment. I plugged the holes in the body from the stock bridge, mounted the Schaller to the body so that it aligned with the pickguard and looked nice, and hoped for the best. I am thrilled to say the bridge had more than enough adjustment with string spacing and intonation and it is looking great and working great! As others have mentioned, this bridge is built extremely well, is rock solid, and sounds great also. You can feel the quality with every screw you turn on this thing.

5.0

schaller roller bridge

By
(Customer's Reviews)


good quality bridge, easy to install and with adjustable string spacing. it suits nice to my new custom build neck through guitar.

5.0

Schaller Rocks

By
(Customer's Reviews)


This bridge allows me to exactly position the strings over the pole pieces of any pickup and the weight
gives killer sustain, can't go past german design

5.0

Delivers the best action yet

By
(Customer's Reviews)


I just completed a new project I called the Sharon-6, named after my wife. I wanted a simple, one pickup design and wanted a shape different from others I have seen. The teardrop shape design while not new, is rarely used. The Schaller bridge gave me the ultimate in alignment and resulted in the tightest intonation and action I have acheived yet. Great stuff, and plays great.

5.0

Schaller Non-Tremolo Roller Bridge

By
(Customer's Reviews)


This is a great Bridge! I love all of the adjustments it has to make for a great set up. 2nd time I've used one. Wheat Instruments, from the Swamp of Odessa FLA, ESQ

5.0

What a difference!

By
(Customer's Reviews)


I installed the Schaller Roller Bridge on a New England Custom Guitars, "FrankenJag". This bridge beats the original by a mile. You can adjust the spacing between the strings until you get it just right. It is a bit heavier than what was on the guitar and helps add tone. And...It looks great in gold. Excellent bridge, I highly recommend it for those looking for a non-tremolo, hard tail bridge.

4.0

Very good !

By
(Customer's Reviews)


Simple to install, nice and good workmanship. Fits on all sides.

4.0

First time experience with this bridge

By
(Customer's Reviews)


It's a rock solid bridge that lets me adjust it in every way imaginable.. It even locks the saddles.. It was a lot heavier than I thought it would be which gives me a sense of stability.



One thing I did have a problem with.. was that the allen whrench that was is the package..uhmm. where do I put it in.?? I'm sure they were ment for the saddle height adjustment screws.. but it's not the right size.. and I can't seem to find the allen wrench since I'm In korea and we go by the metric system... a 1mm allem wrench should fit?... But most sets and most places here have 1.5mm as the smallest size..

5.0

Precision Made

By
(Customer's Reviews)


This is the best fixed bridge on the planet in my opinion. Well machined and heavy. This bridge gave just enough extra weight needed to counter balance my slightly neck-heavy custom build.

5.0

Awesome!

By
(Customer's Reviews)


Worked great on my 1979 Gretsch BST

Displaying 2 of 4
1 2 3 4


StewMac PDF Catalog, page 68 See Schaller Non-Tremolo Roller Bridge
on page 68 of our StewMac Catalog PDF

13MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.