Locking Roller Bridge

  • 36 Reviews
  • Write a review
Buy more, save more!
Locking Roller Bridge Chrome


Item # 5276
In stock, ready to ship!


3 or more $26.66
Locking Roller Bridge Gold


Item # 5276-G
In stock, ready to ship!


3 or more $30.22
Scroll to Top

Locking Roller Bridge

About This Item

Low-friction grooved saddles roll freely with a tremolo so your strings always return to pitch. Adjustable for precise intonation.

2"14"2-29/32"M8 x 1.25

This unique post-mounted brass bridge has low-friction grooved roller saddles for smooth string return, plus advanced features for improved intonation stability. The holes for the bridge posts are elongated to allow overall intonation adjustment, and allen screws lock the bridge to the posts. The reversible roller saddles are individually adjustable for precise string intonation, and also lock to the bridge with allen screws. Allen wrench and thumbwheel mounting posts with bushings are included.

Use an 11mm drill bit to install the bushings.

SAVE when you buy a roller bridge paired with a Bigsby Vibrato Tailpiece:
With Bigsby B50: Locking Roller Bridge with Bigsby B50 Vibrato
With Bigsby B70: Locking Roller Bridge with Bigsby B70 Vibrato

About bridge & tailpiece measurements

Bridge and Tailpiece reference image

String spread is the distance between the centers of the outer strings on a bridge or tailpiece.

Saddle radius determines the arc formed by all the individual saddle heights, and is similar to the measurement of a fretboard.

Stud/post spacing is the distance between the centers of the mounting posts of a bridge or 'stop' tailpiece.

Positioning the bridge
Find bridge placement for any scale with our free online tool fret position calculator.

    • Item #
    • Weight
    • 5276
    • 0.249 lbs. (0.11 kg)
    • 5276-G
    • 0.254 lbs. (0.12 kg)

Customer Reviews

Write a review
  • 4.69 average rating from 36 reviews
Sort by

Epiphone LesPaul replacement - WOW!

(Customer's Reviews)

This is the roller bridge to use for Epiphone Les Pauls! I had an annoying buzz that was happening from the original bridge. Chose the roller bridge just in case I wanted a Bigsby later on (original reason - but found so many more compelling reasons to switch the stock bridge). GLAD I DID!!
* EXACT replacement - didnt have to use bushings as threads are the metric ones used on Epiphone. Post screwed in easily, and bridge dropped right in!
*SOUND - WOW... opened up the sound on my LP with better sustain, better resonance, better harmonics (no kidding!)
* FEEL - better on my wrist (where I typically rest it when playing or palm muting) as it is very smooth and no rough edges; Strings feel responsive and less "brittle" and somehow less effort to bend bringing smoother playing as a result (better for blues too!)
*TUNE - keeps it in tune surprisingly. Less adjustments needed through the course of a nights playing
* Why THIS Bridge -
- construction was very good as is the finish (I got chrome)
- I saw the Schaller at a Luthier, and one issue with that bridge was the way the roller was threaded so that string spacing would be a challenge as no stops were included or designed. This bridge uses screws which hold things in place and does not allow for spacing changes so it is exactly the same per mfg spec, and intonation is NOT a problem. (disregard the other comment in these reviews - its easy to set up)
- It is a DIRECT replacement for Epiphone bridges (and yes I measured every part of the bridge before ordering)
- Cost was reasonable for the quality you get, plus, StewMac would not carry a substandard product; one call to their phone center confirmed this would be an easy install - it was!!

Wrap up: This is a GREAT bridge over a standard or roller bridge replacement options. This should be your FIRST replacement part, even if you dont have any buzz (yet). I am SO glad I purchased this and am enjoying buzz-free playing and a lively sounding Epiphone Les Paul- finally!


The Cure for a Misplaced Bridge

(Customer's Reviews)

My Les Paul style guitar's bridge was originally mounted 1/4" too far away from the bridge pickup and the existing bridge didn't have enough "travel" to allow for proper intonation. This one, with the slotted mounting holes and extra length of travel of the rollers solved the problem and looked good doing it.


Very nice replacement bridge

(Customer's Reviews)

I fitted this bridge into a cheap korean LTD guitar and it was a perfect drop in replacement. A lot more substantial bridge than the cheapo tuneomatic. No friction with the rollers and it locks to the studs. My only gripe with this is the intonation adjustment. Would be nicer to have screwable adjustment than by hand. That would be faster and more precise. But you can get it spot on with this. You just have to be careful and take your time. Looks good on a guitar too.

Showing 3 of 36 Read more reviews >>

StewMac PDF Catalog, page 64 See Locking Roller Bridge
on page 64 of our StewMac Catalog PDF

16MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.