Adjustable Wraparound Bridge

  • 23 Reviews
  • Write a review
Buy more, save more!
Adjustable Wraparound Bridge Chrome


Item # 0401
In stock, ready to ship!


3 or more $32.86
Adjustable Wraparound Bridge Gold


Item # 0401-G
In stock, ready to ship!


3 or more $35.53
Scroll to Top

Adjustable Wraparound Bridge

A modern reproduction of the first combo bridge/tailpiece to feature individually adjustable saddles.

The wraparound design brought accurate intonation to Les Paul Junior®, SG Junior® and similar solidbody guitars, and has been popular since the 1970s.

String spread
Saddle radius
Stud spacing
Stud threads
M8 x 1.25mm

Two alignment screws adjust the overall intonation. The height-adjustable mounting studs include knurled bushings. The strings load from the front of the die-cast base, wrap over the back of the bridge, and over the notched saddles. Drill 7/16" (11mm) holes for the bushings.

About bridge & tailpiece measurements

Bridge and Tailpiece reference image

String spread is the distance between the centers of the outer strings on a bridge or tailpiece.

Saddle radius determines the arc formed by all the individual saddle heights, and is similar to the measurement of a fretboard.

Stud/post spacing is the distance between the centers of the mounting posts of a bridge or 'stop' tailpiece.

Positioning the bridge
Find bridge placement for any scale with our free online tool fret position calculator.

Tip: Slotting Tune-o-matic style saddles
Nut slotting files work great for metal saddles. Choose your file size as you would when slotting a nut: use the same gauge as the string, or a few thousandths larger. After filing to the desired depth, we suggest polishing the slot with Mitchell's Abrasive Cord to remove file marks and burrs.

    • Item #
    • Weight
    • 0401
    • 0.357 lbs. (0.16 kg)
    • 0401-G
    • 0.362 lbs. (0.16 kg)

Customer Reviews

Write a review
  • 4.26 average rating from 23 reviews
Sort by

Potential trouble for PRS, Zero Stars

(Customer's Reviews)

I bought this to replace a PRS stoptail bridge on a PRS SE Custom. Although I researched and was advised that this "should be" a simple swap out, it has turned into a big hassle. The issue is NOT Stewart-MacDonald support. They have been great. The issue is that the specifications for the bridge are requiring a major rework of the product. The threaded studs had to be cut and the bottom lip required machining because they were bottoming out and pulling the bridge up. Also, the width of the female portion of the bridge stud is smaller than the corresponding PRS pieces. In short, I would advise thorough measurements for whatever brand guitar you will use this unit on. The quality of the construction, however, is excellent. It is simply not a swap out for SE Custom PRS guitars.



(Customer's Reviews)

It's a really good bridge. I put it on my Epi Les Paul Special II (EGS1WCNH3), and I barely had to adjust anything.


A very cool & versatile way out for many guitars

(Customer's Reviews)

I have only recently received my order for these bridges and must say I am impressed with the quality of machining & finish. Very versatile for different tops. Reasonably priced and will order them again. A great product.

Showing 3 of 23 Read more reviews >>

Shown on page 66 of our latest catalog.
  • Les Paul® is a registered trademark of Gibson Guitar Corporation.
  • SG® is a registered trademark of Gibson Guitar Corporation.