Close

Fret Rocker

5.0
  • 124 Reviews
  • Write a review

Fret Rocker

Item # 3770
In stock, ready to ship!

$25.18

+
 
Total:
Qty:
Scroll to Top

Fret Rocker

About This Item

Pinpoint those pesky high frets, and check the final height after you've redressed or replaced them, reach for the Fret Rocker!

Our 4-in-1 mini straightedge spans three frets and "rocks" to indicate uneven fret heights. Precision-machined for accuracy to .0015" per foot, the 4", 3", 2" and 1-5/16" edges make it versatile for any fretted instrument, from basses to guitars to mandolins.

The Fret Rocker is made of stainless steel with a durable finish for professional use. It's an indispensable diagnostic tool, before and after partial refretting and recrowning jobs. It lets you do more accurate fret work for better playability.

Essential for Fretting
This item is 1 of the 7 tools included in our Essential Fretting Tool Set, a compilation of tools you'll need for the fundamentals of fret work. The set also includes our book, Fret Work Step-By-Step by Erick Coleman with Dan Erlewine.


Video

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.85 average rating from 124 reviews
Sort by
Displaying 9 of 13
1 2 3 4 5 6 7 8 9 10 11 12 13
5.0

all in one

By
(Customer's Reviews)


I used 4 different gauges, with Fret Rocker now I have everything in one tool.

5.0

An Indispensable Tool 

By
(Customer's Reviews)


I purchased this fret rocker to replace an old similar tool that I have had for many years, unfortunately the older tool was only made of aluminium and had extensive wear to all the edges. I purchased this tool many years ago from Italy and over the years I have had the edges ground up on numerous occasions, but really this tool was well past itÆs sell by date, hence the purchase of this tool. The quality of which, is what you have come to expect from Stewmac, it is top notch and as it is made from stainless steel and I will not have the same wearing problems than I did with the previous original tool, another first class product from Stewmac.

5.0

Want a good setup or not?

By
(Customer's Reviews)


Get one. I've leveled frets with every sophisticated technique out there and still can find renegade high spots within a single fret with this. If you're not too lazy to use it (checking each fret across the entire fret, not just down the middle), you will achieve setups that are as good as it can get and are otherwise impossible.

5.0

Essential Tool!

By
(Customer's Reviews)


Don't use them often but when you need them they make it so easy to find the bad fret!

5.0

Even for bass !

By
(Customer's Reviews)


This tool is as simple as accurate .
Even for a 36.5" bass in the first scales of the neck that are really wide .

5.0

Magnificent and not expensive tool!

By
(Customer's Reviews)


I replaced frets for the first time and thanks to this tool my work much more was facilitated! In the future I constantly will work only as this tool.

5.0

You will find it!

By
(Customer's Reviews)


If you are trying to find that headache fret buzz, this is what you are gonna have to have. Great idea.

5.0

Fret Rocker

By
(Customer's Reviews)


Very useful tool, I use it all the time while pressing frets with 'Jaws'to adjust the level as far as possible as I go along. Then I check the whole fingerboard prior to leveling.

3.0

find that high or low fret fast

By
(Customer's Reviews)


not a must have tool but it makes life alot easier

5.0

It Rocks, Literally.

By
(Customer's Reviews)


An excellent addition to my refretting tool arsenal. Couldn't perform an accurate refret without it.

Displaying 9 of 13
1 2 3 4 5 6 7 8 9 10 11 12 13


StewMac PDF Catalog, page 16 See Fret Rocker
on page 16 of our StewMac Catalog PDF

12MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.