Close

ColorTone Aerosol Guitar Lacquer

4.5
  • 143 Reviews
  • Write a review
Buy more, save more!
ColorTone Aerosol Guitar Lacquer Clear gloss

Clear gloss

Item # 3881
In stock, ready to ship!

$13.70

3 or more $12.19
+
ColorTone Aerosol Guitar Lacquer Clear satin

Clear satin

Item # 3882
In stock, ready to ship!

$13.70

3 or more $12.19
+
ColorTone Aerosol Guitar Lacquer Clear sanding sealer

Clear sanding sealer

Item # 3883
In stock, ready to ship!

$13.70

3 or more $12.19
+
 
Total:
Qty:
Scroll to Top

ColorTone Aerosol Guitar Lacquer

About This Item

The easiest way to spray a professional finish! Produces a beautiful traditional nitrocellulose lacquer finish, without elaborate spray equipment.

ColorTone® Clear Aerosol Guitar Lacquer is formulated especially for musical instruments. Fast-drying and resistant to alcohol and water, it produces a hard, durable finish that enhances the beauty of the wood.

Available in convenient 13-ounce spray cans.

ColorTone® Nitrocellulose Guitar Lacquer can be applied over smooth bare wood, sanded basecoats of grain filler, ColorTone Sanding Sealer, and over ColorTone Stains. Perfect for touch-up work, or for finishing an entire instrument. The rotating-tip nozzle can spray a horizontal or vertical pattern.

Aerosol spraying is an economical way for the beginner to apply a first finish without elaborate setup or equipment. Aerosols produce a slightly rougher surface than spray guns, however, and more sanding may be needed for a level surface.

How many cans do you need?
INSTRUMENT
Electric guitar neck
Solid body electric
Acoustic guitar
Archtop guitar
Mandolin
Ukulele
Dulcimer
Banjo rim and neck
SEALER
none
1 can
1 can
1 can
1 can
1 can
1 can
1 can
LACQUER
2 to 3 cans
3 to 4 cans
4 to 6 cans
4 to 6 cans
3 to 4 cans
2 to 3 cans
3 to 4 cans
3 to 4 cans
Number of cans needed may vary depending on how heavy the coats are applied, number of coats, and desired thickness on your instrument.

ColorTone Clear Satin Lacquer typically requires fewer coats. Successive thin coats should be sanded to maintain a level surface. Don't sand the final coat; the flattener in the lacquer will give a smooth satin appearance.

Application Tips: We recommend spraying multiple thin coats, in a low humidity environment. Heavy-bodied Sanding Sealer (one coat equals two coats of lacquer) will seal stained or unstained wood before the color coats or clear topcoats are applied. At least one can of Sanding Sealer and 4-6 cans of lacquer will usually finish a complete guitar.

Use warm lacquer, not cold!
Pro shops spray heated lacquer because cold lacquer spatters, requiring extra sanding. You should warm up your aerosol lacquer too, simply soak them in a sink of warm tap water.

Our ColorTone Aerosol Finishing Kit is a great choice for the first-time instrument maker. It includes our easy-to-apply clear gloss aerosol finish with the best instruction book available!

California Residents: Click here for Proposition 65 information.

Trade Secrets!

Trade Secrets!

How to spray a sunburst using aerosol cans

Erick Coleman uses tinted aerosols to recreate a vintage Strat 3-tone 'burst.

Instructions

Product Instructions

ColorTone Aerosol Guitar Lacquers

Application instructions for ColorTone Aerosol Guitar Lacquers.

Nitrocellulose Finishing Schedule

A step-by-step flow chart of nitrocellulose finishing.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.55 average rating from 143 reviews
Sort by
Displaying 12 of 15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
5.0

Awesome !!!!

By
(Customer's Reviews)


Read the directions, prepare your guitar the way it says and your guitar will look as good as new if not better. And it is so easy. I will be using it again and again....Thanks StewMac...

5.0

Items for stock

By
(Customer's Reviews)


Items for stock but they arrived very quickly and the quality looks to be fine.



Darrell

5.0

Color Tone Nitrocellulose Lacquer

By
(Customer's Reviews)


I have used this on 4 Ukuleles. It has been great extremely durable finish. And if you let it cure for at least 2 weeks it will buff out fantastic. And you will have a professional looking finish

5.0

The Best!

By
(Customer's Reviews)


Really fantastic StewMac! I purchased a Tacoma guitar with the infamous finish cancer. A great little guitar with a 20 mil+ peeling poly finish. I removed the old finish with a heat gun, and did very little sanding. I applied the StewMac lacquer in thin coats. The lacquer was very easy to apply, and dried very fast, and laid very flat. After several coats the finish looked great, so I stopped. I used less than one of the three cans I purchased. I gave the lacquer several days to cure just to be safe. I buffed the finish with rubbing compound, that is all! I got an ultra thin mirror finish as the final result.


I showed the guitar to friends that saw it with the previous finish. "Unbelievable" was the overall response. There was even talk of the guitar sounding better with the thin finish. Thanks!

5.0

Aerosol Nitro

By
(Customer's Reviews)


I got outstanding results on an after maket Tele neck using Colortone Clear Aerosol Guitar laquer. I shot the neck 3 times a day, waiting 2 hours between coats,for a few days. Each day before spraying, I would sand the previous days work lightly with 400 grit paper. The back of the neck ended up with 12-15 coats, and the headstock got maybe twice that because i was trying to cover a decal to make it look original ( I would never sell it as a Fender, this was purely for me!!).


I did not wet sand and buff the neck, but left it with a semi-flat finish. It looks and feels absolutely awesome!!! Everyone who has touched it loves it, and I am gonna get some work out of this for sure. I think I have one order already!!!

5.0

Top Notch Nitro!

By
(Customer's Reviews)


Great spraying can. Goes on even and smooth and looks great!

4.0

Poor choice for way open grained wood

By
(Customer's Reviews)


First of all I've used this to paint maple necks with good results since 1996.

That said, I was anticipating no worries when I went to use it on a mahogany body and a korina body.

This is not a good choice for open grained woods. Despite grain filling 4 times and sanding off 2 coats of sand sealer and 4 coats of nitro, then 4 coats of sand sealer (per Stew Mac via email)and 11 coats of lacquer I still had lots of pits after level sanding.

I then sprayed nitro into a glass jar, let it evaporate for 4 hours then drop filled all the low spots and level sanded: 3 times.

Judging from the halos that kept showing after drop fills I suspect the paint is formulated with a flash solvent which flashes into any lows in an aggressive way.

Once level, I sprayed another 4 coats of lacquer, level sanded 2 days later, and will wet sand 800, 1200, 1500 and buff in 2 weeks time.

This process took me 6 months, but the maple necks finished with same nitro came out good in only 30 days.

I advise not to use the aerosol nitro on open grained woods, way too time consuming and labor intensive, highly reccomended for tight grain woods such as maple.


4.0

Good with a few setbacks.

By
(Customer's Reviews)


Bought 1 can of sealer and 4 cans of clear gloss for a guitar I built. The sealer went on very well with just one spit because of the cold on the cans (in southern new york where i live its around 35 degrees). However, after sanding I sprayed 4 coats of clear gloss, and it goes on pretty good. It spits a ton though. After I was finished with the coat I had lacquer running down my glove and it spit a good 4 or 5 times on the instrument. I mean its not difficult to remove a spit but its annoying when that happens.


But, the photo to your right shows that it makes a great finish (it'll get glossier when i buff it)

4.0

Functional enough for me

By
(Customer's Reviews)


I used this product when I built my first mandolin because I didn't want to invest in spray equipment. All nozzles are not created equal here, so I coveted those that produced a nice pattern. Dried very fast, even though the temp in my garage was always below 70. All in all a pretty decent product that I will buy again.

4.0

Overall Great Lacquer

By
(Customer's Reviews)


I build my own guitars, and a big part of what I do is painting them. I have used this lacquer on two different guitars so far, and they have worked well on both. The lacquer always comes out smooth, but only if you do it right. Unless you have your own painting shop/building, you will have to use it outside.

You have to spray when the humidity is below 55%, and the temperature is between fifty and eighty degrees. Spray the lacquer about 6 inches from the object and go smoothly back and forth. Light coats work best, other wise you will notice the lacquer runs, and the only way to fix that is to sand it.



The only problem I have with it is that it has such a heavy smell that you are almost forced to use it outside, or else you will stink up the whole house!



Overall great buy, especially because it's hard to find lacquer, let alone specific lacquer for guitars!

Displaying 12 of 15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15


StewMac PDF Catalog, page 40 See ColorTone Aerosol Guitar Lacquer
on page 40 of our StewMac Catalog PDF

12MB File

View with Adobe Acrobat Reader 4.0 or higher.
Download Adobe Acrobat free from Adobe.



  • ColorTone® is a registered trademark of Stewart-MacDonald Manufacturing Company, Inc.