Close

ColorTone Aerosol Guitar Lacquer

4.5
  • 229 Reviews
  • Write a review
ColorTone Aerosol Guitar Lacquer Clear Gloss

Clear Gloss

Item # 3881
In stock, ready to ship!

$14.39

3 or more $12.95
+
ColorTone Aerosol Guitar Lacquer Clear Satin

Clear Satin

Item # 3882
In stock, ready to ship!

$14.39

3 or more $12.95
+
ColorTone Aerosol Guitar Lacquer Sanding Sealer

Sanding Sealer

Item # 3883
In stock, ready to ship!

$14.39

3 or more $12.95
+
ColorTone Aerosol Guitar Lacquer Vinyl Sealer

Vinyl Sealer

Item # 3884
In stock, ready to ship!

$14.39

3 or more $12.95
+
ColorTone Aerosol Guitar Lacquer White Vinyl Sealer
New!

White Vinyl Sealer

Item # 3888
In stock, ready to ship!

$14.39

3 or more $12.95
+
 
Total:
Qty:
Scroll to Top

ColorTone Aerosol Guitar Lacquer

About This Item

The easiest way to spray a professional finish!
Produces a beautiful traditional nitrocellulose lacquer finish, without elaborate spray equipment.

ColorTone® Clear Aerosol Guitar Lacquer is formulated especially for musical instruments. Fast-drying and resistant to alcohol and water, it produces a hard, durable finish that enhances the beauty of the wood.

Available in convenient 13-ounce spray cans.

ColorTone® Nitrocellulose Guitar Lacquer can be applied over smooth bare wood, sanded basecoats of grain filler, ColorTone Sealers, and over ColorTone Stains. Perfect for touch-up work, or for finishing an entire instrument. The rotating-tip nozzle can spray a horizontal or vertical pattern.

ColorTone Sealers have a high solids content for quickly building a finish and provide excellent adhesion for lacquer topcoats. For spraying a transparent finish on new wood, we recommend Sanding Sealer as a base, followed with ColorTone lacquer.

For opaque finishes, refinishing projects, or oily woods, choose our moisture-resistant Vinyl Sealer. Create a white undercoat by using White Vinyl Sealer (important with metallic finishes).

ColorTone Sealers are flexible and compatible with many different finish types. Do not exceed more than 2 coats of sealer.

Aerosol spraying is an economical way for the beginner to apply a first finish without elaborate setup or equipment. Aerosols produce a slightly rougher surface than spray guns, however, and more sanding may be needed for a level surface.


How many cans do you need?

  • Electric guitar neck: No sealer, 2 to 3 cans lacquer
  • Solid body electric: 1 can sealer, 3 to 4 cans lacquer
  • Acoustic or archtop guitar: 1 can sealer, 4 to 6 cans lacquer
  • Mandolin or dulcimer: 1 can sealer, 3 to 4 cans lacquer
  • Banjo rim and neck: 1 can sealer, 3 to 4 cans lacquer
  • Ukulele: 1 can sealer, 2 to 3 cans lacquer

Number of cans needed may vary depending on how heavy the coats are applied, number of coats, and desired thickness on your instrument.

Clear Satin typically requires fewer coats. Successive thin coats should be sanded to maintain a level surface. Don't sand the final coat; the flattener in the lacquer will give a smooth satin appearance.


Application Tips

We recommend spraying multiple thin coats, in a low humidity environment. Heavy-bodied Sanding Sealer (one coat equals two coats of lacquer) will seal stained or unstained wood before the color coats or clear topcoats are applied. At least one can of Sanding Sealer and 4-6 cans of lacquer will usually finish a complete guitar.

Use warm lacquer, not cold!
Pro shops spray heated lacquer because cold lacquer spatters, requiring extra sanding. You should warm up your aerosol lacquer too, simply soak them in a sink of warm tap water.


Our ColorTone Aerosol Finishing Kit is a great choice for the first-time instrument maker. It includes our easy-to-apply clear gloss aerosol finish with the best instruction book available!

California Residents: Click here for Proposition 65 information.

Trade Secrets!

Trade Secrets!

How to spray a sunburst using aerosol cans

Erick Coleman uses tinted aerosols to recreate a vintage Strat 2-tone 'burst.

Instructions

Product Instructions

ColorTone Aerosol Guitar Lacquers

Application instructions for ColorTone Aerosol Guitar Lacquers.

Nitrocellulose Finishing Schedule

A step-by-step flow chart of nitrocellulose finishing.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.62 average rating from 229 reviews
Sort by
Displaying 4 of 23
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
5.0

Great time saver and no cleanup

By

Verified Buyer


This does the same job as the compressor and spray gun with much less hassle.

5.0

Great!!!!

By

Verified Buyer


Just warm can and lays out great! Well worth it!

5.0

Great product

By

Verified Buyer


I refinish floors for a living and was sceptical about this product, I'm very impressed with the finished product

5.0

Consistent Finish EVERY TIME.

By

Verified Buyer


I bought these for a MelodyMaker I am refinishing and refurbishing. The ColorTone supplies I have ordered (including these) are among the most reliable products I have ever ordered. Follow the directions and this stuff works like magic.

5.0

Stuff is great!

By

Verified Buyer


This stuff works great and it's easy to apply but I strongly suggest that you follow the spray schedule. This was also my first time to use it and I recommend that you use the vinyl sealer to seal it instead of just using this to seal alone. After four coats the top still needs more sealer in some spots

5.0

glooss laquer

By

Verified Buyer


the product is very good does the job right 5 star would recommend

4.0

Praisin' da' paint.

By

Verified Buyer


MY GOD ! This stuff is CLEAR ! It's GLOSSY !! It's LACQUER !!!
It's NITROCELLULOSE !!!!........Wait a minute....... that's what it's supposed to be. It says so right on the can. Oh well. It is what it is.

5.0

Excellent!!!

By

Verified Buyer


Easy to use, applies easily, goes on fantastically!

5.0

This is all I use

By

Verified Buyer


I build both acoustic and electric customs. I don't have a fancy spray both or equipment, just a spare bedroom with a fan in the window. Since discovering ColorTone, that's all I use to finish them with. I don't know what they put in that stuff but it works better than anything else I've used.

5.0

Satin Lacquer

By

Verified Buyer


It works great and always has the many times I have used it. I have refinished a Mandolin in the past and now coating some Tubes for a Las Vegas Show.

Displaying 4 of 23
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23


StewMac PDF Catalog, page 40 See ColorTone Aerosol Guitar Lacquer
on page 40 of our StewMac Digital Catalog



  • ColorTone® is a registered trademark of Stewart-MacDonald Manufacturing Company, Inc.