Bolt-on Acoustic Guitar Neck

4.0
  • 11 Reviews
  • Write a review
Buy more, save more!
Bolt-on Acoustic Guitar Neck 14-fret neck

14-fret neck

Item # 1104
In stock, ready to ship!

$150.80

3 or more $134.21
+
Bolt-on Acoustic Guitar Neck 12-fret neck

12-fret neck

Item # 1106
In stock, ready to ship!

$165.38

3 or more $147.19
+
 
Total:
Qty:
Scroll to Top

Bolt-on Acoustic Guitar Neck

Save hours of work! Start with these precision machined necks, so you have more time to work on the details that make the guitar your own.

High quality one-piece quartersawn mahogany necks for Martin-style guitars. What's carved for you:

• Tuner holes • Straight mortise and tenon neck joint
• Truss rod slot • Diamond contour at the peghead base

Each is supplied with two bolts and nuts installed for attachment without gluing. Matching neck block sold separately. A short mahogany filler insert is included for truss rod installation. Final sanding and finishing are required.

14-fret neck
With solid peghead for Dreadnought or other acoustic guitar with 14th fret at the body. Each neck is slotted for our Hot Rod Truss Rod (item #2551, 4mm Allen nut, 14-1/4" long).

Peghole diameter 1/4" (6.35mm)
Peghole spacing 1-5/8" (41.27mm)
Width at the nut 1-3/4" (44.45mm)
Width at the body 2-3/16" (55.56mm)
Truss rod slot width 7/32" (5.56mm)
Truss rod slot depth 7/16" (11.11mm)


12-fret neck
With slotted peghead for 0, 00, and 000 (non-Dreadnought) acoustic guitars with 12th fret at the body. A peghead veneer is recommended. Each neck is slotted for our Hot Rod Truss Rod (item #2550, 4mm Allen nut, 12-1/4" long).

Headstock thickness 5/8" (15.87mm)
Peghole diameter 1/4" (6.35mm)
Peghole spacing 1-3/8" (34.92mm)
Width at the nut 1-7/8" (47.62mm)
Width at the body 2-5/16" (58.74mm)
Truss rod slot width 7/32" (5.56mm)
Truss rod slot depth 7/16" (11.11mm)


Also available
The fingerboard, matching neck block, truss rod, peghead veneer and string nut are sold separately.


Customer Reviews

  • EXCELLENT PRODUCT
  • GOOD PRODUCT
  • AVERAGE PRODUCT
  • FAIR PRODUCT
  • POOR PRODUCT
Write a review
4.0
  • 4.27 average rating from 11 reviews
Sort by
3.0

Better machining would make a better product

By
(Customer's Reviews)


I love StewMac products and have used them for years but, unfortunately, they haven’t produced anything more than a very average product here. They make no outrageous claims as to the machined finish of this piece but I didn’t expect a neck that was only 75% of the way to a finished neck. Maybe that’s the intent …to increase builder flexibility but the dimension margins are just too small. Any serious shaping has to be done with a careful eye on the nut width which is minimal to start with. The headstock is very narrow, narrower than a standard Martin headstock and there is little room for alterations. The machining is somewhat crude. I don’t know what kind of CNC router/shaper the company employs but it does a very rough job of shaping. The first neck I received from SM had to be sent back due to gouges in the carving. The attachment bolts are cheap and they look like screw bolts and nuts one would buy at the local hardware store and they are not the kind of hardware one would put on a fine instrument.

5.0

bolt-on 14th fret

By
(Customer's Reviews)


Well shaped mahogany.Stained well and bolted on well.Perfectly cut truss rod channel.You'll need a triple bend truss rod wrench, Item # 6212, to access the truss rod nut. But with this wrench it works like a charm.

5.0

follow up

By
(Customer's Reviews)


the easy part of being in business is selling your product. Follow up and customer service is how you keep people coming back. Stew Mac dose it right. My neck was just tad out of true and they set me new one no problem. Great website and they respond to emails promptly. Good job!

Showing 3 of 11 Read more reviews >>


Shown on page 77 of our latest catalog.